Proper tailgate for c-series C and D Series Trucks Truck Talk
Topic RSS
5:57 pm
Yard Art
January 30, 2012
OfflineI have two tailgates, one has International stamped into the outer panel, it fits in the c pickup, but someone said it is a D tailgate. Anyone know for sure? I'm not sure how to post pics or I'd post them both here.
6:20 pm
Pile of Parts
December 12, 2009
OfflineThe Model C tailgate is a single panel and does not have International stamped on it. The Model D does has the triple diamond logo stamped on it. They are hard to find!
Dave
9:20 am
Rusty Driver
September 6, 2010
OfflineThe C series seems to be the same as the D without the outer skin. Not sure about the single rod for hinge bolt.
Scott in B.C.[Image Can Not Be Found]
9:52 am
Yard Art
January 30, 2012
Offlineok,thanks, that clears things up. I have a D series pickup in the junk pile but the tailgate is missing, but the stamped tailgate I have does not fit it, did IH use more than one typ of box? I guess it is also possible that the truck has the wrong box.
10:52 am
Golden Anniversary
December 9, 2009
Onlinei have photos of the 37/38 d model box which is different than the 39/40 d box.
reason being is they changed the box style is 39 and they carried the box from the 39 d series clear over into the k/kb series which ran up to 1949.
i also have photos of the c model box which is different than the 37/38 d box although there similar to one another.
with the major differance i can see being the stake pockets.
i will post photos later this after noon as i have to leave as week speak for a doctor apt with my pulmonologist.
Robert/KB48
12:23 pm
Pile of Parts
February 18, 2011
OfflineWe have a 1940 D-2 and the tailgate has "international" stamped in the gate, BUT………..have been told, and at this point, believe that in fact ours is not original. Was told that an original would have the three diamonds stamped in it, as Dave stated. Sorry can not help on the "c" series, but stick around, others with more knowledge than I, will address your concerns.
12:36 pm
Rusty Driver
September 6, 2010
OfflineDepending on when and where the D-2 was made . Canadian D-2 did not receive the rib side box until mid 1940.The INTERNATIONAL Stamped tailgate is correct for U.S. 1940 D-2
Photo of flat side D-2 box with 66067H tail gate.
6:23 pm
Golden Anniversary
December 9, 2009
Onlinefirst i am asking a question here.
which is is the tailgate on this green and black 39/40 d series truck d15h posted the factory correct tailgate for a 1939/1940 d series?
reason i am asking is i was under the understanding that the 39/40 d model had the same tailgate that was used on the k/kb 1 thru 3 with the ihc ribbed side box that was also used on the 39/40 d series.
so i am just trying to get thing straight to what is right and what is not.
next as for the c verses d tailgate of what i have personally seen is that the 37/38 d model tailgate has the triple diamond emblem with the word international stamped into the tailgate.
the 37/38 d model tailgate has 3 lower hinges that function individually of one anther.
so does the c model model yet how ever the hinges on the c operate with a lower rod that connects all three hinges together so they act as one.
also the center hinge on the c series runs the full length top to bottom of the tailgate as were on the 37/38 d model the hinge is only attached to the lower tube of the tailgate.
next you can see the c 37/38 and 39/40 tailgate's and compare them based on the photos d15h has already posted
with this all said i have attached 3 photos 2 are of c model beds and the 3rd is of a 37/38 bed.
reason for the photos is to show the beds are different
the difference in the 37/38 and the c series bed are the stakes pockets.
as the 37/38 d series has tear dropped style stake pockets as were the c bed has straight pockets.
you can see the difference buy comparing the photos as well as the 37/38 d model which is the creme and green truck i posted and the stake pocket is circled in read so you can see the difference.
c model bed image 1
c bed image 2.
although the bed on this truck is a c model bed the truck its self is a chey 1942 to 47 and more commonly know as a wuurlitzer jute box truck as the grill resembles a 40s wurlitzer jute box.
this last truck is a 37/38 d series
lastly hope this helps out.
Robert/KB48
9:14 pm
Pile of Parts
December 12, 2009
OfflineThe first picture is the original tailgate on my 1935 C-1. The second is the replacement which I made.
Dave
9:25 pm
Pile of Parts
December 12, 2009
OfflineThe green truck is a 1940 D-3 with a 1938 D-2 bed on it . The tailgate is original for the 1938 bed.
The gray truck is a1940 D15H with a KB-3 bed on it. The tailgate is one that I built using the D-3 tailgate as a pattern knowing that this is not correct for this bed. I made a mold for the triple diamond logo and cast it from liquid urethane.
Dave
Most Users Ever Online: 162
Currently Online: kb48, Dilbert, kjhogue
21 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Top Posters:
suprjohn: 4753
Mag623: 2860
scottso: 2212
kb48: 2196
lbesq: 1907
MikeMiller: 1812
cornbinder89: 1697
Manfred: 1603
jimbo7457: 1249
kjhogue: 1246
Member Stats:
Guest Posters: 1
Members: 8253
Moderators: 4
Admins: 4
Forum Stats:
Groups: 7
Forums: 25
Topics: 7975
Posts: 65961
Newest Members: David_Lee, Lugnut63, 1938D2zak, deptchief, jm, kawaxler
Moderators: Jim Hadfield (190), J.P. Hansen (946), NW (1581), Test (-1)
Administrators: Jim Hadfield (190), J.P. Hansen (946), NW (1581), Micky (201)
Log In
Register
Home












