Broken axle stop


IHC in the early to mid-fifties.

Yard Art
Yard Art

Posts: 55

Joined: Fri Dec 28, 2018 12:08 am

Post Sun Jul 14, 2019 1:30 am

Broken axle stop

The stop around the center pin is broke in 2 peices in my l110 semi floating axle.
The peices are broke clean and I'm sure it would be nearly impossible to find a replacement part. The peices fit together nicely so I am considering having it welded. The gears look good and suffered no obvious damage. I suspect the part is cast iron, so it would need to be welded accordingly. Any thoughts from you guys about my options ?

Golden Jubilee
Golden Jubilee

Posts: 3866

Joined: Thu Nov 29, 2012 9:28 pm

Location: Lyman, IA

Post Sun Jul 14, 2019 7:00 am

Re: Broken axle stop

Not sure what you are referring to, but just about every day someone is pulling one of these rear ends to replace with a faster ratio Ford 8.8, find the part or a whole rear axle shouldn't be hard.

Golden Jubilee
Golden Jubilee

Posts: 395

Joined: Wed Sep 05, 2018 1:50 pm

Location: Northern New Mexico

Post Sun Jul 14, 2019 7:27 am

Re: Broken axle stop

Last I knew Terrell had a very nice ready to install axle for sale.
56 S120 4x4,

Yard Art
Yard Art

Posts: 55

Joined: Fri Dec 28, 2018 12:08 am

Post Sun Jul 14, 2019 1:50 pm

Re: Broken axle stop

I am trying to keep original as possible, I know I could swap axles but I've already bought all new brakes, bearings etc. Part I'm talking about is the piece that the axle shafts butt against inside the differential.

Golden Jubilee
Golden Jubilee

Posts: 1005

Joined: Fri Nov 30, 2012 6:32 am

Location: Minnesota

Post Sun Jul 14, 2019 2:06 pm

Re: Broken axle stop

check out John's site! L_R S are pretty much the same.
viewtopic.php?f=44&t=719

Yard Art
Yard Art

Posts: 55

Joined: Fri Dec 28, 2018 12:08 am

Post Sun Jul 14, 2019 2:33 pm

Re: Broken axle stop

kevin wrote:check out John's site! L_R S are pretty much the same.
viewtopic.php?f=44&t=719
I have seen this and used it with mixed results, have issues navigating it. Thanks for reminding me of it.
User avatar

Rookie
Rookie

Posts: 12

Joined: Mon Jul 01, 2019 11:12 pm

Post Sun Jul 14, 2019 4:47 pm

Re: Broken axle stop

Here is the parts book photo. What item number are you referring to? I just removed my L110 axle to swap with an 8.8. I have yet to get the other axle out so I am unsure if any of the parts will be salvageable yet.
C1F2487E-6EE8-4A7F-92F6-353602A49093.jpeg

Golden Jubilee
Golden Jubilee

Posts: 3866

Joined: Thu Nov 29, 2012 9:28 pm

Location: Lyman, IA

Post Sun Jul 14, 2019 6:36 pm

Re: Broken axle stop

fordtrimotor wrote:I am trying to keep original as possible, I know I could swap axles but I've already bought all new brakes, bearings etc. Part I'm talking about is the piece that the axle shafts butt against inside the differential.

That is called the "thrust block", item 19.
What I was trying to say, many are pulling IHC axles to replace with the Ford, so there should be a fair supply of IHC axles to get parts or whole rear axle.

Yard Art
Yard Art

Posts: 55

Joined: Fri Dec 28, 2018 12:08 am

Post Mon Jul 15, 2019 12:57 am

Re: Broken axle stop

Yep, thrust block is it, 19. Is 38 a gasket? Mine had no gasket, somehow retained lube though.

Yard Art
Yard Art

Posts: 55

Joined: Fri Dec 28, 2018 12:08 am

Post Mon Jul 15, 2019 1:00 am

Re: Broken axle stop

What donor ford's are being used ? any of them use 12 " drums as I'm going to use original ( new) single mc.
Next

Return to L, R and S

Who is online

Users browsing this forum: No registered users and 0 guests

Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.