exaust manifold 103226 HA


The old and reliable.

User avatar

Golden Jubilee
Golden Jubilee

Posts: 743

Joined: Tue Dec 04, 2012 5:38 pm

Post Fri Aug 23, 2019 4:35 pm

exaust manifold 103226 HA

Looking for an exaust manifold , will fit a BLD 250 , 269 282 308 ect. Having a bit of difficulty locating one . I found a 125931 R1 intake but if some one has both and wants to part with them I would sure apprieate it . It is what is on a BD 308 .
Thanks Eric AKA The Manic Mechanic

Golden Jubilee
Golden Jubilee

Posts: 5170

Joined: Thu Nov 29, 2012 9:28 pm

Location: Lyman, IA

Post Fri Aug 23, 2019 4:53 pm

Re: exaust manifold 103226 HA

I know the intake ports a larger on the 282 and 308 when compared to the BLD, are the exhaust the same?
User avatar

Golden Jubilee
Golden Jubilee

Posts: 743

Joined: Tue Dec 04, 2012 5:38 pm

Post Fri Aug 23, 2019 6:23 pm

Re: exaust manifold 103226 HA

I'm not sure , I just know that the part numbers are the same for the exaust manifold . I guess you can tell if you have the right gasket Huh ?

Golden Jubilee
Golden Jubilee

Posts: 5170

Joined: Thu Nov 29, 2012 9:28 pm

Location: Lyman, IA

Post Fri Aug 23, 2019 7:12 pm

Re: exaust manifold 103226 HA

Well if the part number is the same, than it is a good bet they are. As far as gaskets, as long as they don't reach into the port area, and seal they have done their job.
Exhaust manifolds take a beating on medium and heavy engines, lots of thermal and physical stress. Finding a used one that doesn't require some machine work would be a coup.
User avatar

Golden Jubilee
Golden Jubilee

Posts: 743

Joined: Tue Dec 04, 2012 5:38 pm

Post Sat Aug 24, 2019 7:07 am

Re: exaust manifold 103226 HA

By machine work CB , do you mean like re-surfacing ?

Golden Jubilee
Golden Jubilee

Posts: 5170

Joined: Thu Nov 29, 2012 9:28 pm

Location: Lyman, IA

Post Sat Aug 24, 2019 8:14 am

Re: exaust manifold 103226 HA

Yeah, and some crack repair. The bigger the engine and therefor longer the manifold the more it is prone to warping. It is why IHC 1st went with multi piece and then two separate manifolds on the RD series.
User avatar

Golden Jubilee
Golden Jubilee

Posts: 4922

Joined: Thu Nov 29, 2012 11:47 am

Location: Bothell, Washington

Post Sat Aug 24, 2019 7:00 pm

Re: exaust manifold 103226 HA

I had a few, not sure if I sold them, I'll look. but yes same part # as Red
Gentle Men! you can't fight in here! This is the war room!

Pile of Parts
Pile of Parts

Posts: 30

Joined: Tue Aug 30, 2016 2:59 pm

Post Sun Aug 25, 2019 1:11 pm

Re: exaust manifold 103226 HA

I have two of these I'm not going to be using. Same part number that you shared with us. These are from Blue Diamond 269 engines.
Send me a PM and we can share phone numbers and all that stuff.
I'm in the middle of unloading this winters wood for the wood stove's but, can put a straight across each of them to find the best one for you.
It may take me a day to get to get to this but, we can talk about it.
I'm thinking just shipping will cover it if you decide on one.
I also have a cam shaft, crank shaft, head, block w/o liners or main caps, oil pan, valve cover, side cover and one clutch inspection cover. I think I have an oil filter canister too.
If anybody needs any of these things let me know.

Peter

Return to K and KB

Who is online

Users browsing this forum: No registered users and 5 guests

cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.