Headliner 1948 KB1


The old and reliable.

Yard Art
Yard Art

Posts: 70

Joined: Fri Dec 29, 2017 8:55 pm

Location: Roseville, Calif.

Post Thu Jul 11, 2019 8:51 pm

Headliner 1948 KB1

Looking for a headliner, Seen on eBay (Jackjilll). Anyone Tried one of their headliner ? Easy install ? Major problems, Fit or install?

Thanks
Lefty 1948 KB1

Golden Jubilee
Golden Jubilee

Posts: 328

Joined: Fri Mar 18, 2016 9:16 pm

Location: Dallas, TX

Post Thu Jul 11, 2019 10:40 pm

Re: Headliner 1948 KB1

User avatar

Golden Jubilee
Golden Jubilee

Posts: 1887

Joined: Thu Nov 29, 2012 10:40 am

Location: Wichita, Kansas

Post Sat Jul 13, 2019 1:38 pm

Re: Headliner 1948 KB1

I have no personal experience with this series truck (and maybe I should just stop there), but robertkb48 used to insist that there was enough variation in the location of the holes in the cab, that it made buying a headliner with pre-punched holes a crapshoot. This may be especially true when comparing US-built to Canadian-built trucks.

Jackjilli has a good reputation here.

Dean
Lifelong Kansan
Grew up with red paint
Moved off the farm 33 years ago.
User avatar

Golden Jubilee
Golden Jubilee

Posts: 4922

Joined: Thu Nov 29, 2012 11:47 am

Location: Bothell, Washington

Post Sat Jul 13, 2019 2:45 pm

Re: Headliner 1948 KB1

^^^agreed^^^,
I bought Jackjilli door skins for my L-112 and pre-punched holes were too big and not dead on to holes in doors,

headliner for it was same, holes didn't line up,

interestingly on my panel you could still see the grease pen or chalk they used to mark where to put holes in body for headliner, so they weren't machine punched accurately, done by hand,

I wonder if you can order the liners not punched and do it yourself?
Gentle Men! you can't fight in here! This is the war room!

Rusty Driver
Rusty Driver

Posts: 119

Joined: Wed Jul 15, 2015 9:04 pm

Location: Ridgefield, Wa.

Post Sat Jul 13, 2019 9:51 pm

Re: Headliner 1948 KB1

I think all of the headliners may come from repops in Arkansas but you can't buy from them. I just installed a new headliner in my R150 and as already said, all the holes did not lineup. I installed the retainers that aligned, all but four, and then drilled new holes in the cab to match the ones in the headliner. Worked out ok but kind of a hassle. The directions even said that they may not all line up.
At least have fun
Dennis

Golden Jubilee
Golden Jubilee

Posts: 946

Joined: Sat Dec 22, 2012 8:28 am

Post Sun Jul 14, 2019 5:55 pm

Re: Headliner 1948 KB1

On my S-120, we drilled new holes in the metal to match the holes in the cardboard and reused the stock clips. I have two K-Series headliners that I couldn't make work on my prior trucks. I am going to fill in all the holes with epoxy and repaint them and then make new holes to match the holes in the sheet metal of my KB-5 and KB-3 dually. Stickman 207

Return to K and KB

Who is online

Users browsing this forum: No registered users and 10 guests

Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.