'52 L110 lug pattern


Early 50's IHC hot rods

Rookie
Rookie

Posts: 1

Joined: Mon Mar 18, 2013 11:04 am

Post Mon Mar 18, 2013 11:12 am

'52 L110 lug pattern

Does anybody know what the lug pattern and lug diameter is for a 1952 L110 pickup?

Site Admin
Site Admin

Posts: 4938

Joined: Thu Nov 29, 2012 9:10 am

Location: Nampa, Idaho

Post Mon Mar 18, 2013 12:23 pm

Re: '52 L110 lug pattern

The Bolt circle on those wheels would be 5 on 4 1/2 the stud itself should be a 5/8(I believe) Measure the bolt circle from center of one hole, skip a hole, to outside edge of the next hole.
Here is a good video of how to measure:http://www.youtube.com/watch?v=yV7sDseS3Gg
More simplistic view of measuring :http://www.youtube.com/watch?NR=1&v=7m-Cq9pCeMU&feature=fvwp
User avatar

Golden Jubilee
Golden Jubilee

Posts: 630

Joined: Fri Nov 30, 2012 10:04 pm

Post Wed Mar 27, 2013 6:41 pm

Re: '52 L110 lug pattern

The studs should be 1/2" diameter.
Bill
KB owner since 1972 and still loving it.
Retired Lineman, mechanic, fabricator, retired motorcycle racer.
South Amherst, Ohio

Site Admin
Site Admin

Posts: 4938

Joined: Thu Nov 29, 2012 9:10 am

Location: Nampa, Idaho

Post Wed Mar 27, 2013 7:48 pm

Re: '52 L110 lug pattern

Wildmanbill wrote:The studs should be 1/2" diameter.
Bill

You are Correct Bill! I measured the holes, sometimes the old melon does not think it through.

Rusty Driver
Rusty Driver

Posts: 144

Joined: Mon Mar 03, 2014 11:24 pm

Location: Alberta

Post Thu Mar 06, 2014 1:43 am

Re: '52 L110 lug pattern

The Ford wheels from the '92 and newer Crown Vic and '90 and newer Town Cars fit. Maybe others too, Ford had a couple different patterns but I know I have 1 wheel off a '90 Town Car on my L110 right now and it fits perfect, even on the center hole it fits snug on the hub just like the IHC wheel does. Not sure if this info is useful to you but figured I would post it up.
1952 L 110
1953 R 160 (parts truck)
1963 Ford C-series
1982 Ram 250 Van
1989 Nissan Pulsar NX (backup/project)
1994 Town Car (daily driver)
2000 Neon (snow plow & yard vehicle)

Rusty Driver
Rusty Driver

Posts: 186

Joined: Wed Dec 05, 2012 12:46 pm

Post Fri Mar 07, 2014 1:35 pm

Re: '52 L110 lug pattern

Hey Matt, for the Ford wheel you have mounted, is it on the front or the back? I was just wondering how the spacing is with the tie rod if in the front.

Rusty Driver
Rusty Driver

Posts: 144

Joined: Mon Mar 03, 2014 11:24 pm

Location: Alberta

Post Wed Mar 12, 2014 11:35 am

Re: '52 L110 lug pattern

diltonw wrote:Hey Matt, for the Ford wheel you have mounted, is it on the front or the back? I was just wondering how the spacing is with the tie rod if in the front.


I have it on the front right wheel currently, it is a 15" doughnut spare wheel and seems to have plenty of clearance on everything. I have an '82 Dodge van and the bolt pattern on those wheels is the same as well but the center hole is too big, although not all wheels do fit snug on center.
1952 L 110
1953 R 160 (parts truck)
1963 Ford C-series
1982 Ram 250 Van
1989 Nissan Pulsar NX (backup/project)
1994 Town Car (daily driver)
2000 Neon (snow plow & yard vehicle)

Return to Early Fifties Hot Rods

Who is online

Users browsing this forum: No registered users and 3 guests

cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.