Golden Jubilee
Posts: 2048
Joined: Thu Jan 24, 2013 8:49 pm
Re: KB6 Clutch
Did you watch the video? Plain as day it shows the control valve is the first thing activated in the HV. Push the pedal,it activates the MC,pressure from the MC goes to the control valve which in conjunction with the vacuum in the HV activates the slave cylinder which then sends the pressure to the wheel cylinders. Omit a step in the bleeding procedure and something isn't going to work properly.
In this illustration you can see the bleeder screw on top of the control valve and on the SC boxed in orange.
Never argue with a fool...
If you don't have anything nice to say...say nothing.
If you don't learn something new everyday...you weren't paying attention.
THINK! Be sure brain is connected before mouth is in gear.