Yard Art
Posts: 52
Joined: Tue Jan 15, 2013 4:12 pm
Location: boise idaho
? front axle F-160 bore diameter for king pin 55' R110
I'm replacing the king knuckle pins on a 55' R110 that according to the CTS-11 manual has a F-160 axle. No where can I find out what the bore dimensions/specifications should be for the axle bore where the king pin fits through. The king pin diameter is described as 0.861 inches.
How do I tell if the bore on the axle is worn beyond specs and needs an oversized king knuckle pin?
Thanks,
Neal