Locking Hubs for IHC S120

Does anyone still make locking hubs to fit this truck?

Warn may be your best option go to their website and or call customer service.
You will need to know what front axle your truck has. The axle is likely a DANA. THE BOM or bill of materials will be available from Dana. The BOM number is stamped into the top of the axle tube, most likely on the longest side.

From what I've read IHC used Dana 44 front axles in these trucks, I'm guessing the same ones NAPCO used for Chevy and GMC. That gives me some hope that hubs are still available. Maybe someone here has recently bought some and can throw a part number at me. If not I like the Warn hub suggestion and will contact them. I'll count splines and take a measurements while I'm at it. I recently learned the hard way that BOM #s aren't always there while I was trying to find parts for a late seventies IHC Scout Dana 44 Scout rear axle.

Early dana 44

if stock, its on the front web
I will see if I have some
IH is factory

none

none

Thanks I appreciate you looking, I'll continue my search.

http://www.quad4x4.com/catalog/category/ihc44fclosed

This looks promising!

I looked in my parts manuals and was surprised to find the locking hubs were not listed. I was hoping to get an exploded diagram to share. I looked at the quad 4x4 link, they have lots of nice parts, a little spendy but good to at least have the option.

I was wondering are you looking for replacement parts? Anything specific?

I looked in my parts manuals and was surprised to find the locking hubs were not listed. I was hoping to get an exploded diagram to share. I looked at the quad 4x4 link, they have lots of nice parts, a little spendy but good to at least have the option.

I was wondering are you looking for replacement parts? Anything specific?

Right now my front axle only has the drive flanges on it so I need an entire setof locking of hubs. I don't like the extra drag and wear on front end parts having the axle "locked in" all the time. A nice used set would be ideal for me because my truck will be more of a rustoration than a restoration so shiny new hubs will look out of place. If I can't find a used set then I suppose I can dull down the new ones but the close to $300.00 price does not set well with me or my budget.

email sent