BD 240 Rebuild?

I have just started to poke around under the hood of the S120 but one thing I noticed on the way home with it day before yesterday was that there was a pretty steady trail of blue smoke coming out of the exhaust pipe. The plugs are oily but haven't I haven't done a leak test down test yet or pulled the head but it has got me thinking about the possibility of a rebuild. Are all the parts and gaskets still available for this motor?

Others may speak up, but i have used rock auto several times for gaskets and the like. I live in England, so rock auto are one of the few that ship international. Apart from getting stung on import duties on the last stuff i bought, i have never had a problem. Luke
https://www.rockauto.com/en/catalog/int ... /+set,5412

Gaskets can also be gotten from Olsens Gaskets. http://www.olsonsgaskets.com/ Can not speak to rings and pistons and such.

Pistons will likely have to be custom. Seals and beatings are still readily available.

I hope it is a simple fix an hour or two drive may improve.

Pistons will likely have to be custom. Seals and beatings are still readily available.

"The beatings will continue until morale improves."

I know it was an unintentional typo...just having a little fun with it.

"The beatings will continue until morale improves."

Hahahaha

I think Egge machine shop may still make pistons.

If you have a TILT VALVE MOTOR, these would work
https://www.ebay.com/itm/BD220-BG220-IH ... SwaENbUNuF

Pistons will likely have to be custom. Seals and beatings are still readily available.

"The beatings will continue until morale improves."

I know it was an unintentional typo...just having a little fun with it.

Hahahaha! I gotta love auto-correct... Some days "beatings" is actually fitting when driving/caring for one of these old Binders.