240 BD Industrial Tilt Valve


IHC in the early to mid-fifties.

Golden Jubilee
Golden Jubilee

Posts: 946

Joined: Sat Dec 22, 2012 8:28 am

Post Tue Jul 03, 2018 8:11 am

Re: 240 BD Industrial Tilt Valve

Thanks Paul h- Only problem is I don't know how to access Mikes library.- Stickman 207
User avatar

Golden Jubilee
Golden Jubilee

Posts: 530

Joined: Sat Dec 01, 2012 9:55 am

Post Tue Jul 03, 2018 8:27 am

Re: 240 BD Industrial Tilt Valve

Oldihc.org, and the link at the bottom of the page. Doesn't work for you? I'd scan it, but can't post a pdf. Send me a PM if you can't get to it.

Site Admin
Site Admin

Posts: 4938

Joined: Thu Nov 29, 2012 9:10 am

Location: Nampa, Idaho

Post Tue Jul 03, 2018 9:57 am

Re: 240 BD Industrial Tilt Valve

Here is the link from the oldihc.org page once I opened it up: https://app.box.com/s/otkihx6yoa/1/26460540
And here is the link in the "library" on this site: https://www.box.com/shared/otkihx6yoa

Either one should get you to information, I happen to use the last one if I need it, but they are the same
User avatar

Golden Jubilee
Golden Jubilee

Posts: 1887

Joined: Thu Nov 29, 2012 10:40 am

Location: Wichita, Kansas

Post Tue Jul 03, 2018 10:22 am

Re: 240 BD Industrial Tilt Valve

The link on the OldIHC page is titled Gangster International. Here is a direct link to the MT118 manual-
https://app.box.com/s/otkihx6yoa/folder/64063215


There actually was a kit offered to convert the early bypass oiling system to the later full-flow system. Machining of the block and an external hose was required. This thread give some insight into the differences in the oiling system-
viewtopic.php?f=8&t=3562&hilit=oil+filterhttp://oldihc.org/phpBB3/viewtopic.php?f=8&t=3562

Dean
Last edited by dean466 on Tue Jul 03, 2018 12:37 pm, edited 1 time in total.
Lifelong Kansan
Grew up with red paint
Moved off the farm 33 years ago.

Golden Jubilee
Golden Jubilee

Posts: 5171

Joined: Thu Nov 29, 2012 9:28 pm

Location: Lyman, IA

Post Tue Jul 03, 2018 10:30 am

Re: 240 BD Industrial Tilt Valve

either McFarlands or Richie Implement are good sources. They buy from Parts Depot, IHC's obsolete parts warehouse. I think you have to be a dealer to buy from Parts Depot, but I have used RIchie a few times for stuff for my 9670. The direct ship to me, after paying Richie with a credit card.

Golden Jubilee
Golden Jubilee

Posts: 946

Joined: Sat Dec 22, 2012 8:28 am

Post Tue Jul 03, 2018 11:04 am

Re: 240 BD Industrial Tilt Valve

Thanks to all of you- . I think I have located what I need.- Dan

Golden Jubilee
Golden Jubilee

Posts: 946

Joined: Sat Dec 22, 2012 8:28 am

Post Tue Jul 03, 2018 6:35 pm

Re: 240 BD Industrial Tilt Valve

I want to thank all of you for your input and guidance- it made looking for a needle in a haystack much easier. Paul H , the number you came up with matched the number that Portland North, a long time International Truck dealer in Maine came up with. Ordered the complete assembly today. I think Portland North got it from one of the suppliers suggested and I think it is correct the some of theses aggregators sell only to dealers and I don't blame them. Will report back when installed. Stickman 207
Previous

Return to L, R and S

Who is online

Users browsing this forum: No registered users and 13 guests

Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.