Motor Mount for S-120

Has anyone found motor mounts for the S-120?- Stickman 207

Which style one do you need? I might have a spare old style one from my L.

I NEED THE FRONT ONE WHICH SOMEONE DESCRIBED AS SHAPED LIKE A WISHBONE. I SEE THAT ONE OF THE VENDORS , IHC PARTS AMERICA HAS THE REAR ONES.- STICKMAN 207

the wishbone is a metal contraption, the motor mounts themselves are 2 square rubber blocks for the bottom of wishbone to frame, and a rectangle double sided/double bolt one for up top,

the lowers are available, the upper one is not readily available, there are companies that rebuild it,

rears list as being different for SD-220 VS. SD-240 but they look the same to me,

If you need the metal one, I have one, I had the rubber mount that sits on top of that made by then & now, they did a great job.

IH parts america sells the same one as fitting silver diamond and black diamond. Kevin, I will get back to you via e-mail and appreciate the offer.- Stickman 207

If Kevin has one he can lay hands on that will probably faster than waiting on me to dig through my spares.

waltesefalcon- Thanks for your offer to look. What I need for the FRONT mount is the rubber/metal sandwich which has 2 threaded bolts pointed upwards and two bolts pointing down as shown on the pictured Bedrockjon posted. I also need the 2 rubber squares at the bottom. Thanks.- Stickman 207

No problem, It'll probably be Sunday before I can get into my stash of IH odds and ends.

There's some info in this thread-

viewtopic.php?f=8&t=6332&p=47421

Dean