OldIHC

hello everyone i have a 1949 to 1951 L130
the vin in the truck says international motor truck
chassis # says 660 the # on the frame says in a circle -10 witch one is right?
any input would be awesome guys

Some of the guys from Canada might be able to help.

The data plate should be on the back edge of the driver door.

Example from one of my trucks, manufactured in Canada, the serial number (circled) is what I used when registering the vehicle:


From my older truck, it only had chassis serial number:


The truck model (L130) and chassis serial number should also be stamped on the outside vertical edge of the frame, driver side, about six inches back from the front hanger of the front spring. May be very faint and hard to read, use a flashlight and penetrating oil. The model + chassis number stamped on the frame should match the info on the data plate.


Also, I am in Edmonton too! There are lots of IHC guys around locally, good resources for information and spare parts

here is a pic of my vin

I clean off the frame drivers side nothing is there ill take a pic later today
i know a guy in slave lake who told me that the front axle spindles and be cut down to a chevy hub setup with disk drakes have you heard of this?

found the vin thank you so much

Where exactly on the frame did you find this vin#?