Chassis serial number


IHC in the early to mid-fifties.

Pile of Parts
Pile of Parts

Posts: 26

Joined: Fri Oct 17, 2014 1:09 am

Location: edmonton AB canada

Post Fri Nov 04, 2016 11:19 pm

Chassis serial number

hello everyone i have a 1949 to 1951 L130
the vin in the truck says international motor truck
chassis # says 660 the # on the frame says in a circle -10 witch one is right?
any input would be awesome guys
1950 international L130 flat deck

Site Admin
Site Admin

Posts: 4938

Joined: Thu Nov 29, 2012 9:10 am

Location: Nampa, Idaho

Post Sat Nov 05, 2016 12:34 am

Re: Chassis serial number

Some of the guys from Canada might be able to help.

Freshly Restored
Freshly Restored

Posts: 244

Joined: Sun Jan 10, 2016 7:56 pm

Location: Edmonton, Alberta

Post Sat Nov 05, 2016 8:58 am

Re: Chassis serial number

The data plate should be on the back edge of the driver door.

Example from one of my trucks, manufactured in Canada, the serial number (circled) is what I used when registering the vehicle:
Image

From my older truck, it only had chassis serial number:
Image

The truck model (L130) and chassis serial number should also be stamped on the outside vertical edge of the frame, driver side, about six inches back from the front hanger of the front spring. May be very faint and hard to read, use a flashlight and penetrating oil. The model + chassis number stamped on the frame should match the info on the data plate.


Also, I am in Edmonton too! There are lots of IHC guys around locally, good resources for information and spare parts

Pile of Parts
Pile of Parts

Posts: 26

Joined: Fri Oct 17, 2014 1:09 am

Location: edmonton AB canada

Post Sat Nov 05, 2016 11:35 am

Re: Chassis serial number

here is a pic of my vin
Attachments
^2BBB221CBF1C0565C3C72256AB3BDAEFF4C7083A3BDA60CFC2^pimgpsh_fullsize_distr.jpg
vin#
1950 international L130 flat deck

Pile of Parts
Pile of Parts

Posts: 26

Joined: Fri Oct 17, 2014 1:09 am

Location: edmonton AB canada

Post Sat Nov 05, 2016 11:54 am

Re: Chassis serial number

I clean off the frame drivers side nothing is there ill take a pic later today
i know a guy in slave lake who told me that the front axle spindles and be cut down to a chevy hub setup with disk drakes have you heard of this?
1950 international L130 flat deck

Pile of Parts
Pile of Parts

Posts: 26

Joined: Fri Oct 17, 2014 1:09 am

Location: edmonton AB canada

Post Sat Nov 05, 2016 12:11 pm

Re: Chassis serial number

found the vin thank you so much
Attachments
L130 660 vin.jpg
drivers side just where you said it was
1950 international L130 flat deck

Golden Jubilee
Golden Jubilee

Posts: 368

Joined: Tue Mar 26, 2013 9:11 am

Location: Bryan, Ohio

Post Fri Mar 30, 2018 1:15 pm

Re: Chassis serial number

Where exactly on the frame did you find this vin#?

stuie-Q wrote:found the vin thank you so much
1953 R-120
4 spd, Long bed 220 ci

Return to L, R and S

Who is online

Users browsing this forum: No registered users and 12 guests

Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.