L-120 Parking Brake Pic?

I am getting ready to re-install the parking brake yoke and other bits and pieces... I have a picture from the parts manual, but was wondering if anyone had a good picture from under your truck. It has been a long time since I took this stuff down and I don't really remember how it went.

Your help appreciated!

FredD

If yours was a floor brake lever, these may help. Even if they are off of a 49 KB1 the principle is the same.

I have a hand lever from under the dash..

Here is what I am looking to install...



Thanks!

FredD

I can not help with that one Fred. The under dash ones that I had, I did not take apart, and I have no pictures. I do know that the under dash one on my L112 went to the Rear drums, it did not have a transmission brake. Those parts are long gone now, I think.

Lloyd

Look in this link, I am sure it is the brake section.
http://nwaringa.wordpress.com/2009/09/18/mt-63-manual/

Thanks for the suggestions guys... I appreciate it.

I was able to get the easy part in...





Now I just need to figure out how the handle cable gets routed and secured so when you pull the handle the cable has something to pull against!

I saw that link to Nicks (?) website... thanks, he was very active when I started my refurb... hope he is well.

FredD

Here are some pics of the main cable attachment point on the tranny. I believe this tranny was a replacement for the original that I believe was a three on a tree...

This looks like a PO fabricated bracket. It does the job so I left it as is.




The yoke attachment was in rough shape, but looks better now after bead blasting and painting. Plenty of never-seize on all parts, especially stainless buts/bolts.



FredD