Kingpins

Does anyone out there know what kingpin kits are available for the '53 R130 front ends? My front axle needs them for sure. Part numbers would be appreciated.

Bruce, you can look up your part here, I have many bushings, not sure about the pins. They can be machined easy or the other brands are the same. Look at the parts manual, hope this helps.
http://www.hansenwebdesign.com/truck/fi ... 20Axle.pdf

I found my king pin set on E-Bay... If you still need these, I can look up the vendor info.

FredD

I am going to need them as mine have a considerable amount of play. Too much for me to feel safe.

Here's the PN's I found...

62905R93 IHC [from MT-97]

Crosses to...
530-1043 Raybestos Chassis
8390B Federal Mogul / Moog

Pin size 5.439 L x .861 Dia.

He's Back!!!!!!

Here's the PN's I found...

62905R93 IHC [from MT-97]

Crosses to...
530-1043 Raybestos Chassis
8390B Federal Mogul / Moog

Pin size 5.439 L x .861 Dia.

Thanks Scottso

Also check NAPA: 262-1367
(NAPA number may be a Raybestos, or other)

Dont have any for the 130

Thanks for checking Kevin