sd 220 pistons
Posted: Sat Feb 01, 2014 8:34 pmlooking for some STD sd 220 pistons and rings . any help . thanx kevin the rookie from ky
Page 1 of 2
Posted: Sat Feb 01, 2014 8:34 pmRe: sd 220 pistons
Posted: Sun Feb 02, 2014 12:01 amCheck the classifieds under parts, there is somebody in Michigan with a SD 220 engine he scrapped but the ad says he has the pistons still for sale - nothing mentioned about the rings, but I have seen links with references to rings recently, check some of the recent posts - good luck! - Bob
Re: sd 220 pistons
Posted: Sun Feb 02, 2014 9:58 amI have a set of STD 3 ring for the SD-BD 220-240, if they will work, let me know.
kevin
kevin
Re: sd 220 pistons
Posted: Sun Feb 02, 2014 1:44 pmkevin wrote:I have a set of STD 3 ring for the SD-BD 220-240, if they will work, let me know.
kevin
kevin , i hate 2 sound stupid , what is the diff . between 3 ring and 4 . thanx kevin from ky.
Re: sd 220 pistons
Posted: Sun Feb 02, 2014 2:00 pmThere was a change from 4 groove to 3 groove pistons which by the parts manual is determined by engine serial number.
So the question is,do your pistons have 3 or 4 ring grooves?
So the question is,do your pistons have 3 or 4 ring grooves?
Re: sd 220 pistons
Posted: Sun Feb 02, 2014 2:45 pmno stupid ???????????ssss scott answered perfectly.
Re: sd 220 pistons
Posted: Sun Feb 02, 2014 3:51 pmkevin wrote:no stupid ???????????ssss scott answered perfectly.
kevin , ive got2 partial sets of both. i dont no if the 3 rings are STD or not . they have part #s on top . any help ? thanx kfk
Re: sd 220 pistons
Posted: Sun Feb 02, 2014 4:19 pmkevinkfk wrote:kevin wrote:no stupid ???????????ssss scott answered perfectly.
kevin , ive got 2 partial sets of both. i dont no if the 3 rings are STD or not . they have part #s on top . any help ? thanx kfk
PNs, You need to know what your looking for, then ask. The correct number asking for .040 is 173163-R91
Hope this helps
kevin
Chart below on another post.
Re: sd 220 pistons
Posted: Sun Feb 02, 2014 4:27 pmkevin wrote:kevinkfk wrote:kevin wrote:no stupid ???????????ssss scott answered perfectly.
kevin , ive got 2 partial sets of both. i dont no if the 3 rings are STD or not . they have part #s on top . any help ? thanx kfk
PNs, You need to know what your looking for, then ask. The correct number asking for .040 is 173163-R91
Hope this helps
kevin
Chart below on another post.
kevin , the 3 ringer says125875 r1
Re: sd 220 pistons
Posted: Sun Feb 02, 2014 4:55 pmI dont see that number in the general chart, the info is there for different years, dont know if the tilt valve rings are the same, maybe you are looking at is in the manual, they did not change much. Dont know if the tilt valve rings are the same, I assume they are. You better check that number. Triyng to help.