Page 3 of 6

Re: Parts Link

PostPosted: Thu Oct 23, 2014 7:43 pm
by lbesq
Possible reproduction King Seeley Gauges/senders:

http://mykmlifestyle.com/King_SeeleyTem ... _Send.html

Re: Parts Link

PostPosted: Tue Oct 28, 2014 4:22 pm
by stuie-Q
Hey I'm new here and would like to
pass on info for windshield that fits
The L130 and other L line from 1950
and up the place is Crackmasters in Edmonton
AB Canada web site is
www.windshieldedmonton.com
phone# is 780 488 2255 ask for philip

Oil Pressure Gauge Sending Unit

PostPosted: Sun Dec 28, 2014 8:42 pm
by lbesq
Oil Pressure Gauge Sending Unit
Scottso Did more research...
First I looked in the MT-97 (R series book) and found there is only one temp. and one OP sender listed for all models,engines and voltage.
Of course the numbers are NFG today so I went to other books that would have the SD/BD/BG engine family. Many listed the same later pn's and the gauges all use a voltage regulator same as the L,R & S do.
In the MT-118 ('66-'68 Light Line) I found the gauge cluster for flat back cowls is the same type used in the L,R & S.
With that,I went to cross referencing the IH numbers listed for the BG241/264...

259357C91 OP sender
PS113 SMP
OP6622 Echlin
http://www.napaonline.com/Catalog/Catal ... 0460729522

259358C91 Temp. sender
TS17 SMP
TS6178 Echlin
http://www.napaonline.com/Catalog/Catal ... 0460851121



I also found a supposed NOS OP sender pn 84779HB that's listed in the MT-97 but I don't think it to be correct for a gauge sender,an idiot light yes.
http://www.ebay.com/itm/1951-57-IHC-TRU ... 0628969003

I did however stumble on a NOS cluster VR;
http://www.ebay.com/itm/50S-IH-INTERNAT ... 4d28534f1c
Good price if anybody needs one,I've seen them listed at 3 times that.
Even if it doesn't look exactly like what you may have,shouldn't really matter as IH had at least 6 variations with the difference being the attached mounting bracket and/or the type of terminals.

Re: Parts Link

PostPosted: Mon Jan 12, 2015 11:23 pm
by jemiller33
I was at my local O'Reilly Auto Parts today buying ignition parts for my BD240 (I got the rotor, cap, condenser, points, plugs, and wires).

I asked the counter person buy chance did they carry a Sock Type Oil Filter for the International Pickup. Low and behold he said that they did.
An earlier thread 2 yrs ago on this forum had given Carquest as a place to get the filter. So. I'm just providing another location to acquire the filter.

*Part Description:Sock Oil Filter
*Part Number: 51002
*Source: O'Reilly Auto Parts
*Source Address: National Locations
*Source Web Link: www.oreillyauto.com
*Comments: Mfg: WIX ($17.99)

O'Reilly Auto Parts carries a good number of parts for farming equipment and the International Truck.

JEM

Re: Parts Link

PostPosted: Mon Jan 26, 2015 1:06 am
by jemiller33
I don't know who all might need this info on distributor small parts. I just happen to have a broken clip and this is the result of some of my searches.

MT-97 #1871838 crosses to the numbers indicated below. Classic Chevy showed it as the OE#.


*Part Description: Distributor clip with bracket
*Part Number: 57-10281
*Source:Classis Chevy
*Source Address:
*Source Web Link: http://www.classicchevy.com
*Comments: ($9.99 ea.) MT-97 number 1871838 crosses to the Classic Chevy number.
Clips at Chevy.jpg
Clips at Chevy.jpg (3.44 KiB) Viewed 22181 times


*Part Description: Clip with bracket
*Part Number: 220107
*Source: Keen Part
*Source Address:
*Source Web Link: http://www.keenparts.com
*Phone Number:
*Comments: ($10.00)
Clip at Keen.jpg


*Part Description:Distributor Cap Clips without Pins
*Part Number: 7RA-12144
*Source:C&G Ford Parts
*Source Address:
*Source Web Link:www.cgfordparts.com
*Phone Number:
*Comments: Covers vehicles 1947 to 1956 6 cyl. ($8.00 pr.)
Clips at Ford.JPG
Clips at Ford.JPG (7.26 KiB) Viewed 22181 times


*Part Description:Distributor Cap Spring Clip
*Part Number:ABC488S
*Source:Kuhns Equipment Repair
*Source Address:
*Source Web Link:www.antiquetractorsrus.com
*Phone Number:
*Comments: ($14.95 ea.) This place carries other parts for the distributor and other ignition items.
Clip at Tractor.jpg
Clip at Tractor.jpg (4.81 KiB) Viewed 22181 times


Hope it helps someone other than me!



JEM

Re: Parts Link

PostPosted: Sat Feb 28, 2015 9:01 pm
by sdakotapaul
Found a lower radiator hose that works on my 52 l110 Gates 21379 It is too long as purchased but a little shortening on both ends and it looks good. Hose came from Oreilys $19

Re: Parts Link

PostPosted: Thu Mar 05, 2015 7:57 pm
by nikkinutshop
OUTSIDE SUNVISORS:
http://www.vendio.com/stores/bobsclassicautoglass/
This business has a good selection of outside sunvisors. While they do not mention IHC, it may be possible that one of the offered models may fit, with some minor modifications.
I will very likely be ordering their automotive glass for another car project. Their shipping is reasonable.
Check out their web-site.

Re: Parts Link

PostPosted: Fri Mar 20, 2015 12:26 pm
by Rattlinrack
A couple of us using this forum has bought outside sun visors from a gentleman in Mo. He has good visors and he also sometimes has Unity spotlights with the IH logo on them. He is a great guy who is willing to help find the correct parts. Look him up @ loupeestuff.com My visor fit on with no modification.

Re: Parts Link

PostPosted: Mon Mar 30, 2015 8:50 pm
by HoustonJoe
*Part Description: 12 volt starter for BD220 and probably others
*Part Number:Napa 440448
*Source:Napa
*Source Address:
*Source Web Link:
*Phone Number:
*Comments: Re-manufactured Delco 10MT starter does not include solenoid

*Part Description:Solenoid for above
*Part Number:ST124SB
*Source:Napa
*Source Address:
*Source Web Link:
*Phone Number:
*Comments:Does not include bolts to mount on starter

Re: Parts Link

PostPosted: Fri Jan 01, 2016 10:17 am
by kevin
Brake Drums are available at Rockauto, 110, 112 models I assume but dont know for sure maybe L-R too. I believe these are 12 inch, call