Post Fri Aug 02, 2013 3:59 pm

Delux oil filter housing info needed

Trying to get my old Binder running and I'm come into another stumbling block. I have an SD240 freshly rebuilt but I don't have an oil filter housing that will hold oil. Both of the units I had were rittled with holes when they came out of the bath.

Image
Image

Here's what is left after I removed the housings.

Image
Image

While taking them apart I noted that the one on the left had a second fitting in the bottom of the housing with an orifice that was about a 1/16" in dia. The one on the right had a small hole drilled into the side of the base nut for the return tube. Again the hole was about 1/16" in dia.

Can anyone offer up info on these two units and if one may be more desireable to use than the other? I will say that the one on the right is a confirmed Deluxe filter unit and was installed on the SD240 when I got it. My gut is telling me that neither of these are "full flow" filter housings.

Thanks,
Jake
'55 IH R-122- BG265 w/TBI fuel injection
'64 Porsche 356 C
'68 and '73 BMW 2002s
‘14 VW Passat SE TSI
3 Vintage Sears garden tractors ('66-'74)