Rusty Driver
Posts: 172
Joined: Fri Oct 10, 2014 2:25 am
Re: New Toy 54 R100
cornbinder89 wrote:Looking at the label, 12 volt + goes to the red wire, black is neg. The yellow is 6 pos and again black is neg. Hook the red to switched positive and hook your 6 volt loads to the yellow, both blacks go to ground.
Gauges, and heater? are likely to be 6 volt. IIRC that year uses vacuum wipers, so nothing needed for them.
So to replace the resistor, one of the wires will be 12+ and one of the wires will be the 6 volt loads.
I got the red being positive and the black is negative or ground, So my own clarity, of the two red wires coming from the resister, that go directly to the battery, I connect the red lead from the battery to the red lead on the new unit and the other red lead from the battery to the yellow lead on the new unit?