Page 1 of 1

Tanged Spindle Washer

PostPosted: Sat Jul 10, 2021 5:42 pm
by nrowles
I noticed one of my rear spindle nuts coming loose. Do I need a tanged spindle washer like in the picture below with a tang on the inside to go through the keyway to hold the washer from spinning and wrap the outside tangs over the nut to hold it on? Any help in sourcing this part? It seems any I can find online are much larger and none of the local auto parts or shops or farm supplies that I would expect to have this have no way to get them for me.

Image

Re: Tanged Spindle Washer

PostPosted: Sat Jul 10, 2021 6:27 pm
by nikkinutshop

Re: Tanged Spindle Washer

PostPosted: Sat Jul 10, 2021 6:30 pm
by Buzzman72
This part should fit K/KB 1/2, L-R-S 110/111/112. IH part number 1120Y, manufactured by Jacob Chapin at Chapin Design.

https://www.ebay.com/itm/174831912049?h ... SwGaVeEnkN

If you seek one for a different application, I don't know.

Re: Tanged Spindle Washer

PostPosted: Sun Jul 11, 2021 6:47 am
by nrowles
Thanks to both of you. The measurements for the one in the Ebay link look correct so I'm going to order them.