vacuum advance control replacement


IHC in the early to mid-fifties.

Rusty Driver
Rusty Driver

Posts: 130

Joined: Fri May 30, 2014 7:49 am

Post Wed Jun 30, 2021 11:40 am

vacuum advance control replacement

hey Folks, any suggestions for a replacement vacuum advance assembly that will go on a BD264? did a search and really didn't find anything p/n wise.....
Thanks

Golden Jubilee
Golden Jubilee

Posts: 1378

Joined: Fri Nov 30, 2012 6:32 am

Location: Minnesota

Post Wed Jun 30, 2021 3:29 pm

Re: vacuum advance control replacement

Is this the one you have?
I stole this from Paul. Otherwise some tilt valve dist VC engines are different. I don't have the PNs, I'm sure Paul does.
Attachments
Vacuum Advance.jpg
Vacuum Advance.jpg (4.26 KiB) Viewed 811 times

Golden Jubilee
Golden Jubilee

Posts: 1378

Joined: Fri Nov 30, 2012 6:32 am

Location: Minnesota

Post Wed Jun 30, 2021 3:48 pm

Re: vacuum advance control replacement

tilt type
Attachments
s-l225.jpg
s-l225.jpg (6.53 KiB) Viewed 806 times
User avatar

Golden Jubilee
Golden Jubilee

Posts: 486

Joined: Sat Dec 01, 2012 9:55 am

Post Wed Jun 30, 2021 4:07 pm

Re: vacuum advance control replacement

MT-103 shows a Delco-Remy part number of 1116088. It looks like there was one on Ebay with a listing that ended today. Check it. It might not have sold and may be relisted.

Golden Jubilee
Golden Jubilee

Posts: 457

Joined: Sat Mar 23, 2013 6:36 pm

Location: Pocono Summit , Pa

Post Wed Jun 30, 2021 7:33 pm

Re: vacuum advance control replacement

If you have the assembly and it is just the diaphragm that is bad they can be replaced. I replaced mine with one from a later model GM on my Kb . Works like a champ.

Rusty Driver
Rusty Driver

Posts: 130

Joined: Fri May 30, 2014 7:49 am

Post Wed Jun 30, 2021 8:27 pm

Re: vacuum advance control replacement

thanks for the input all. Macgiver is correct the diaphragm is all i need, purchasing another 70 year old unit would probably give me the same results...a cracked diaphragm. I ordered a Pertronics unit to go with the new igniter and coil that I also purchased. I was really concerned with it looking stock as possible and thought a unit looking stock could be bought...wrong again!!!

Thanks,
Terrell
Columbia, Mo.

Golden Jubilee
Golden Jubilee

Posts: 1378

Joined: Fri Nov 30, 2012 6:32 am

Location: Minnesota

Post Fri Jul 02, 2021 8:31 am

Re: vacuum advance control replacement

Sent email

Rookie
Rookie

Posts: 18

Joined: Thu Aug 10, 2017 6:21 pm

Post Mon Jul 19, 2021 4:01 pm

Re: vacuum advance control replacement

I recently rebuilt own V/A with a thicker diaphragm material. I even had a few extras made and would be willing to part with one or 2. Too bad my pics can't be posted here or I can show how it's done.

Golden Jubilee
Golden Jubilee

Posts: 1378

Joined: Fri Nov 30, 2012 6:32 am

Location: Minnesota

Post Mon Jul 19, 2021 4:08 pm

Re: vacuum advance control replacement

Email sent

Golden Jubilee
Golden Jubilee

Posts: 1378

Joined: Fri Nov 30, 2012 6:32 am

Location: Minnesota

Post Mon Jul 19, 2021 5:52 pm

Re: vacuum advance control replacement

Been in touch with Mr Wade, here is a link not sure if it's his, Pics to follow.
https://www.youtube.com/watch?v=pNsVY0mvoO0
Next

Return to L, R and S

Who is online

Users browsing this forum: No registered users and 5 guests

Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.