R140


IHC in the early to mid-fifties.

Golden Jubilee
Golden Jubilee

Posts: 601

Joined: Fri Nov 30, 2012 7:50 pm

Location: New Bern, NC

Post Sat Apr 06, 2019 6:31 pm

R140

Picked this up for my friend who had to move away temporarily for work. It's living at my house while I try to figure out why it has no compression. Wisconsin site said it weighed 4700lbs....clearly not! Part of me hopes he decides to sell it!
Attachments
20190406_175655-1024x576.jpg
20190406_170918-1024x576.jpg
20190406_170852-1024x576.jpg
Matt H.
My toys:
1951 International
1972 Buick Centurion
1957 Buick Special
1939 Buick Special
1978 Cadillac Superior Hearse

Golden Jubilee
Golden Jubilee

Posts: 8937

Joined: Thu Dec 27, 2012 12:45 pm

Location: Canada's left Coast

Post Sat Apr 06, 2019 7:03 pm

Re: R140

I am thinking that 4700# might be very close to the weight. My R120 4X4 with a V8 Diesel weighed 5577#. I like that truck. I hop you become the owner.
Attachments
R120 in 1991 (2).jpg
I would rather have tools I do not need than to need tools I do not have
Thinking risks being controversial and possibly being offensive

Golden Jubilee
Golden Jubilee

Posts: 601

Joined: Fri Nov 30, 2012 7:50 pm

Location: New Bern, NC

Post Sat Apr 06, 2019 7:08 pm

Re: R140

This truck sits way higher than my r180 dump. And since the engine is already junk I could get a 7.3 or a Cummins.
Matt H.
My toys:
1951 International
1972 Buick Centurion
1957 Buick Special
1939 Buick Special
1978 Cadillac Superior Hearse
User avatar

Golden Jubilee
Golden Jubilee

Posts: 4922

Joined: Thu Nov 29, 2012 11:47 am

Location: Bothell, Washington

Post Sat Apr 06, 2019 7:28 pm

Re: R140

that is a beefy truck,

I have a good SD 264 that would slip right in there like a glove
Gentle Men! you can't fight in here! This is the war room!

Golden Jubilee
Golden Jubilee

Posts: 601

Joined: Fri Nov 30, 2012 7:50 pm

Location: New Bern, NC

Post Sat Apr 06, 2019 7:37 pm

Re: R140

bedrockjon wrote:that is a beefy truck,

I have a good SD 264 that would slip right in there like a glove

Lol. Id have to go diesel. But in case the current owner wants to stay original I'll be looking at IH in-lines.
Matt H.
My toys:
1951 International
1972 Buick Centurion
1957 Buick Special
1939 Buick Special
1978 Cadillac Superior Hearse

Golden Jubilee
Golden Jubilee

Posts: 866

Joined: Wed Sep 05, 2018 1:50 pm

Location: Northern New Mexico

Post Sat Apr 06, 2019 7:53 pm

Re: R140

Wow that's a very cool truck! By all means do what it takes to talk your friend into selling it to you!
56 S120 4x4,

Golden Jubilee
Golden Jubilee

Posts: 601

Joined: Fri Nov 30, 2012 7:50 pm

Location: New Bern, NC

Post Sat Apr 06, 2019 8:38 pm

Re: R140

Binder Mike wrote:Wow that's a very cool truck! By all means do what it takes to talk your friend into selling it to you!

Ha ha ha ha
Matt H.
My toys:
1951 International
1972 Buick Centurion
1957 Buick Special
1939 Buick Special
1978 Cadillac Superior Hearse

Golden Jubilee
Golden Jubilee

Posts: 8937

Joined: Thu Dec 27, 2012 12:45 pm

Location: Canada's left Coast

Post Sat Apr 06, 2019 8:58 pm

Re: R140

A Cummins 5.9 "B" series will fit right in. The early Cummins 5.9 with the 12 valve heads is about 250 pounds lighter than the later 24 valve. Even at the lower weight the early Cummins is about 850 pounds.
If you make the decision to install a 6.9 or later 7.3 V8 Diesel, you will have to rebuild the cab around the engine. I built a "doghouse" set back of 6 inches to allow for the width of the engine. The 6.9 and 7.3 are 37 inches wide. The left inner fender apron must be modified to accommodate the V8 Diesel. I made this modification to my R120 in 1991. The performance was a little disappointing.
The 6.9 and 7.3 engines are very heavy. At 1150 pounds, I had to build a subframe and add air springs to carry the weight of the engine.
Cooling was a situation. I had a custom radiator built for my R120. The radiator was set forward as far as was possible. The new radiator was 3 inches wider than the OEM. The new radiator cost $1000 before tax.
These older IDI engines are close to obsolete now and some parts are becoming difficult to buy and the prices of parts are going up fast.
If you can find a Cummins 4bta it will be a better fit for your situation. The 4bta weighs the same as the OEM engine, has double the power and triple the economy.
I have a Cummins 4bta with a TH475 and an NVG 241c transfercase. They are attached and work together. This package was destined for an L110 4X4. I am getting older and I have to consider my options. This engine package may be for sale. I do not know when this might happen.
https://youtu.be/_U5M6eIQpZk
Attachments
CUMMINS 4BTA REBUILT.jpg
CUMMINS 4BTA REBUILT INJECTION.jpg
ENGINE FIT UP FRPONT VIEW.jpg
CAB WITH TWIN WINDOWS.jpg
R120 6.9.jpg
6.9 worn out and in an R120.jpg
I would rather have tools I do not need than to need tools I do not have
Thinking risks being controversial and possibly being offensive

Golden Jubilee
Golden Jubilee

Posts: 601

Joined: Fri Nov 30, 2012 7:50 pm

Location: New Bern, NC

Post Sat Apr 06, 2019 9:17 pm

Re: R140

Wow
Matt H.
My toys:
1951 International
1972 Buick Centurion
1957 Buick Special
1939 Buick Special
1978 Cadillac Superior Hearse
User avatar

Golden Jubilee
Golden Jubilee

Posts: 759

Joined: Thu Nov 29, 2012 6:44 pm

Location: New Salisbury, IN USA

Post Mon Apr 08, 2019 5:49 am

Re: R140

wndsofchng06 wrote:Picked this up for my friend who had to move away temporarily for work. It's living at my house while I try to figure out why it has no compression. Wisconsin site said it weighed 4700lbs....clearly not! Part of me hopes he decides to sell it!


The GVW, loaded, should be in the 5000-5500 pound ballpark. Unloaded, I don't see it weighing more than 3200-3500 pounds, stock.
My posts contain my own opinions...your mileage may vary, void where prohibited, objects in the mirror may be closer than they appear, and alcohol may intensify any side effects.
Next

Return to L, R and S

Who is online

Users browsing this forum: No registered users and 6 guests

cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.