Golden Jubilee
Posts: 4923
Joined: Thu Nov 29, 2012 11:47 am
Location: Bothell, Washington
Re: L/R Series front spindles
a 110 5 on 4.5 hub drum will slip right on a 120 axle,
the axle beam is heavier, but the actual spindle part is the same, same bearings etc.
I changed my KB pickup from a KB 1 to a 3 and back again, rear axle was some work, but front was simply swapping hub/drums,
the axle beam is heavier, but the actual spindle part is the same, same bearings etc.
I changed my KB pickup from a KB 1 to a 3 and back again, rear axle was some work, but front was simply swapping hub/drums,
Gentle Men! you can't fight in here! This is the war room!