Sun Jul 21, 2019 4:19 pm by DonO-MN
Thanks Guys! The electrall generator output is 12.5 KW at 120/208 volt, 3-phase, 4-wire. It needs to spin at 3600 RPMs to provide 60 cycle power. I have a tractor mounted electrall, a trailer mounted electrall and a fast-hitch electrall. The truck electrall completes my collection. The electrall unit made for the truck is slightly different than the electrall unit used on the tractors. The tractor version has all the plug-ins on the bottom of the unit, not a problem when the electrall in 3 feet off the ground when mounted on the tractor. The early trailer and fast hitch electralls were the same as the tractor version, which made the plug-in connections very hard to access. Later versions of the trailer and fast hitch electralls had a connection box mounted on top of the electrall with a hinged cover. The truck version of the electrall used a low profile version of the top connection box. My collector friend Mike in Illinois was able to find this rare truck version electrall. Mike was kind enough to trade it to me, for this project! So this was truly a project only possible with the assistance of many folks! DonO
attached is a pic of a trailer electrall unit with the top mounted connection box and the truck electrall
- Attachments
-
- truck electrall connection box
-
- electrall with connection box