Weight

stand 2 is like what i was looking at for 90 i want to say its a AC DELCO but i cant remember

You can make that one more stable by extending the front T to the same width as the back, However, what is it's weight capacity?

1,000 pounds

never buy cheap unless you only want to or need to use it once. look for value: price / quality / intended use.

Like? I dont know much about stands

I recently removed my 69 roadrunner from rotisserie I built. I have 2 ends that look like engine stands built with 4''square tube.bottom tube going across is 5' tube coming out bottom middle is 5.' vertical tube is 5'. all on 4'' caster wheels.engine plate is welded to a 3'' pipe which slides into a 4'' pipe which is greased and removable .I have different heads for several engines and transmissions and the tubes that mount to cars.everything comes apart and I can stand it in corner out of the way.with one on each end I can turn a car with ease.i can push it out in rock driveway to pressure wash engines trans and car or truck bodies and frames.makes painting easy.

Tigwelder,
It sound like you've done some good engineering. Do you have pictures?

Dean

Tigwelder,
It sound like you've done some good engineering. Do you have pictures?

Dean

I will look for some I know I have some with car on them.