OldIHC

1947 KB2

Any sources for the steel bushings on the leaf springs?
Easternmarine bushings don't have the proper O.D. (.815).

I took a different approach. I drilled my leaf spring ends out to take trailer spring bushings. I got my 9/16 inch grease bolts and bushings from a trailer supply place. Here is an example:
https://www.etrailer.com/search/bushing+9%2f16

I did this back in stone ages of the 70s with no internets to find stuff,

the IHC ones are oddball size, what I did was drill out bushing to accept a 5/8 shank # 8 bolt, figured it would last at least 30 years, and it did