Rookie
Posts: 9
Joined: Tue Oct 03, 2017 9:25 am
Location: Eaton Rapids, Mi
K and KB Frame? Same? Different?
First the back story.
My 49' KB-2 has a little twist to it. Sits a little low on the LF, and also a little low on RR.
Suspecting a little twist in the rear frame rails, and spring sag on the LF, but have not got the measuring tools out yet.
Planning FatMan Fab MII for the front, and four link in the back side this winter, so figured I'd deal with it and sort it then.
While at Iron Invasion this past weekend I run into a friend of a friend who has a 46' K2 blasted and painted bare frame available.
The gears start turning. I might be able to get this frame and stick it on the chassis table to be sure its straight, to a roller state with the MII and four link, and then transfer my cab and bed over.
I could strip mine and do the same.
But how close is a 46' K2 frame to a 49' KB-2?
They are both 125" W.B. so that's a good start.
Anybody have some knowledge to share?
49' KB-2
77' Amen Savior Chopper
60's style vintage SuperModified