Reproduction bed plates


The old and reliable.

Golden Jubilee
Golden Jubilee

Posts: 328

Joined: Fri Mar 18, 2016 9:16 pm

Location: Dallas, TX

Post Sun Oct 01, 2017 2:43 am

Reproduction bed plates

I probably know the answer to this..but, thought I would check. Does anyone know if there are reproduction bed plates. The little plate on the left rear corner, that gives the bed size and model number. I'm going to need a microscope, dental tools to bring mine back, aluminum is pitted etc.

Rusty Driver
Rusty Driver

Posts: 108

Joined: Fri Dec 07, 2012 2:30 pm

Location: Tacoma, WA

Post Mon Oct 02, 2017 12:57 am

Re: Reproduction bed plates

Wylie: Is this ebay item what you're looking for? http://www.ebay.com/itm/International-Harvester-Body-Model-Trim-Number-Plate-Tag-part-Owners-VIN-number-/322744523207?hash=item4b251299c7:g:fSUAAOSwQPlV9NP~&vxp=mtr

Hope that link works, otherwise search ebay for 'International Harvester Body Model Trim Number Plate Tag part Owners VIN number' .

Golden Jubilee
Golden Jubilee

Posts: 328

Joined: Fri Mar 18, 2016 9:16 pm

Location: Dallas, TX

Post Mon Oct 02, 2017 11:09 am

Re: Reproduction bed plates

Awesome, that's the one! Thanks. I thought they only made the larger one for under the hood.

Rusty Driver
Rusty Driver

Posts: 108

Joined: Fri Dec 07, 2012 2:30 pm

Location: Tacoma, WA

Post Mon Oct 02, 2017 9:20 pm

Re: Reproduction bed plates

Glad that's the one your looking for. The K series might be like the D series and also has this small ID tag to identify the cab. On the D series this tag was attached to the floor driver's side towards the seat. However any D I've owned had this tag severely corroded - accumulated dirt and moisture did them in. The same tag is used on the D-2 pickup box.

Golden Jubilee
Golden Jubilee

Posts: 328

Joined: Fri Mar 18, 2016 9:16 pm

Location: Dallas, TX

Post Tue Oct 03, 2017 12:36 am

Re: Reproduction bed plates

Yeah, mines a 46 K and has the tag two tags in the cab on left floor vs inside hood.

Return to K and KB

Who is online

Users browsing this forum: No registered users and 15 guests

Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.