Rusty Driver
Posts: 117
Joined: Thu Jan 17, 2013 6:29 pm
Mon May 22, 2017 12:48 pm
Door Window Glass positioning
So I'm getting ready to install my door glass into the lift channel using setting tape. Does anybody know what the correct position for the lift channel on the glass is i.e the front of the channel is 2.5" from the edge of the glass.
I know others have done it with sealant and just let the channel float into a final position but I don't think I have that option using the tape.
I did a bit of forum search but couldn't seem to find if this has been addressed in the past.
I know others have done it with sealant and just let the channel float into a final position but I don't think I have that option using the tape.
I did a bit of forum search but couldn't seem to find if this has been addressed in the past.
"A good scientist is a person with original ideas. A good engineer is a person who makes a design that works with as few original ideas as possible. There are no prima donnas in engineering"
Freemnan Dyson
Freemnan Dyson