Shop Talks #23 2-speed Vacuum Controls


The old and reliable.

User avatar

Rusty Driver
Rusty Driver

Posts: 160

Joined: Thu Nov 29, 2012 8:21 pm

Location: Grand Forks, N.D.

Post Sun Jan 20, 2013 4:17 pm

Shop Talks #23 2-speed Vacuum Controls

I was so excited. After putting off spending the 70.00, I finally ordered my copy of the K/KB service manual (CTS-8). Now I find out it does not cover the information I need. It refers me to "Shop Talks for International Servicemen #23 (CTS-69) Vacuum Shift Controls for Two-Speed Axles".
I know I will still use the manual in the future, but it was so disappointing.
Does anyone know where I might find a copy or the information contained within?
Thank you in advance.
"If this was easy, everyone would be doing it"

Site Admin
Site Admin

Posts: 4938

Joined: Thu Nov 29, 2012 9:10 am

Location: Nampa, Idaho

Post Sun Jan 20, 2013 6:43 pm

Re: Shop Talks #23 2-speed Vacuum Controls

Alas, last summer, I had my hands on those very same manuals. I did not have the money at the time, to purchase them. I will try to find out from the fellow, who bought them. Perhaps someone on the site has those.
Lloyd
User avatar

Rusty Driver
Rusty Driver

Posts: 160

Joined: Thu Nov 29, 2012 8:21 pm

Location: Grand Forks, N.D.

Post Sun Jan 20, 2013 9:47 pm

Re: Shop Talks #23 2-speed Vacuum Controls

By the way, if anyone needs, I have #1,2,3,4,5,7,8,9,10,11,12,13 and 48. I borrowed the following list from binder planet

#1 Revised / "Servicing the Two-Speed Rear Axle" / A-233-HH / 1944 / 8 pages
#2 Revised / "Reconditioning HD Engine Valves and Valve Mechanism for HD Engines in Model D-2, D-3, D-15, D-30, DS-30, D-300, D-186-T, DS-186-T" / A-224-HH / 1944 / 8 pages
#3 Revised / "Piston Ring Replacement, Oversize Piston-Pin Installation, Connecting Rod and Water Pump, Overhaul the HD Engine" / A-225-HH / 1944 / 8 pages
#4 / "Tuning-Up the HD Engine" / A-226-HH / 1944 / 8 pages
#5 Revised / "Series 28 Zenith Carburetor Service" / A-227-HH / 1944 / 8 pages
#6 / "Preparation of New Trucks for Delivery" / A-67-HH / 1944 / 8 pages
#7 Revised / "Brake Adjustment Instructions for K-1, K-2, K-3, K-1M, K-3M" / A-83-FF / 1941 / 14 pages
#8 / "K-1, K-2, K-3 Transmissions (Models HDS and HDS-A)" / A-249-HH / 1944 / 8 pages
#9 Revised / "K-4, K-5 Transmissions (Model H-41, H-41B)" / A-230-HH / 1944 / 8 pages
#10 / "Propeller Shafts and Universal Joints -Type DR" / A-231-HH / 1944 / 8 pages
#11 Revised / "Clutch Overhaul (Models RK-10, RK-10-A used in K-1, K-1-M, K-2, K-3-M, K-4, KS-4, K-5, KS-5, K-5-COE, and KS-5-COE, Single Dry Plate Type" / CTS-38G / 1947, 8 pages
#12 / "Carburetor Service - 63 Series" / A-72-FF / 1944 / 8 pages
#13 / "K-Line Cab Service" / A-234-HH / 1944 / 8 pages
#14 Revised / "Water Pump Service" / A-290-HH / 1944 / 20 pages
#15 / "Spark Plug Cleaning & Adjustment" / A-128-FF / 1942 / 4 pages
#16 / Carburetor Service Zenith Series 30, used in K-6, K-7" / A-235-HH / 1944 / 8 pages
#17 / "Truck Storage Suggestions" / A-182-FF / 1942 / 4 pages
#18 / "Vacuum Power Unit (Bendix Hydrovac)" / A-185-HH / 1944 / 16 pages
#19 / "Zenith 29-Series Carburetor" / A-217-HH / 1944 / 12 pages
#20 / "Theory & Fundamentals of Air Brakes" / A-8-II / 1944 / 16 pages
#21 / Governor Service for the Zenith Gov-U-Retor" / A-35-II / 1945 / 28 pages
#22 / Holley Carburetor & Governor Model AA-1G Carburetor and Model 1174 Governor / A-175-II / 1945 / 28 pages
#23 / "Vacuum Shift Control for Two-Speed Axles" / A-176-II / 1945 / 12 pages
#24 / "Air Brake Unit Maintenance, Bendix Westinghouse" / A-201-II / 1945 / 22 pages
#25 / "Timken Double-Reduction Axles S-200-P and U-200-P" / CTS-49 / 1946 / 20 pages
#26 Revised / "Vacuum Power Unit (Bendix Hydrovac) Third Series-Models 373853, 374750, 374980" / CTS-71 / 1948 / 24 pages
#27 Revised / "Holley Carburetor Models 847-F and 847-FS / CTS-66G / 1947 / 16 pages
#28 / "Oil Pump Overhaul, GRD, BLD, and RED Engines" / A-278-JJ / 1946 / 12 pages
#29 / "Metro Body" / A-305-JJ / 1945 / 14 pages
#30 / "Vacuum Power Unit (Bendix Hydrovac) Third Series-Tandem Cylinder, 'C' Series" / CTS-74 / 1947 / 20 pages
#31 / "Holley Carburetor and Governor Model 885-JJSG Carburetor-Model 1174 Governor" / CTS-76 / 1947 / 24 pages
#32 / "T-97 Transmission" / CTS-77 / 1947 / 8 pages
#33 / "Clutch Overhaul (Model R-15-8)" / CTS-78 / 1947 / 8 pages
#34 / "Two Speed Double Reduction Differential & Carrier Assembly; (Timken S-300-P and U-300-P Axles)" / CTS-79 / 1947 / 16 pages
#35 / "Carter Carburetor-Series BBR-1 Models 615-S, SS, SA, SC, and 656 S)" / CTS-80 / 1947 / 16 pages
#36 / "International Continental Engine R-6586" / CTS-81 / 1948 / 28 pages
#37 / "F-55 Series Transmissions - Models 55 (Fuller 5C-650) and F-55-C (Fuller 5C-65)" / CTS-82 / 1948 / 12 pages
#38 / "Auxiliary Transmission (Brown-Lipe 6231 and 6231-A)" / CTS-83 / 1948 / 12 pages
#39 / "Brown-lipe Five-Speed Transmission (Models BK 6252 and BL 6253)" / CTS-84 / 1948 / 16 pages
#40 / "Power Dividers Hendrickson-Models HPDA and HPD" / CTS-85 / 1948 / 20 pages
#41 / "Auxiliary Transmission (Brown-Lipe 5531)" / CTS-86 / 1948 / 12 pages
#42 / "Carter Fuel Pump (Model M593S)" / CTS-87 / 1948 / 8 pages
#43 / "Timken Single Reduction Axles L-100 and R-100" / CTS-88 / 1948 / 24 pages
#44 / "Silver Diamond Engine, SD-220 and SD-240" / CTS-89 / 1950 / 20 pages
#45 / Missing, Not Currently Available
#46 / "Carter Carburetor, Series YF (Models 735S, 736S, 736SA, 740S, 741S, and 741SA)" / CTS-107 / 1950 / 20 pages
#47 / "12 CX Hydraulic Torque Converter and 2-A-301 Transmission" / CTS-108 / 1950 / 16 pages
#48 / "Electrical System Diagnosis-Regular Maintenance" / CTS-169 / 1951 / 32 pages
"If this was easy, everyone would be doing it"

Golden Jubilee
Golden Jubilee

Posts: 605

Joined: Sat Dec 01, 2012 5:33 am

Location: Conneaut Lake, PA

Post Mon Jan 21, 2013 8:57 am

Re: Shop Talks #23 2-speed Vacuum Controls

I have most of them, missing #23 unfortunately:

Image

Image
User avatar

Rusty Driver
Rusty Driver

Posts: 160

Joined: Thu Nov 29, 2012 8:21 pm

Location: Grand Forks, N.D.

Post Mon Jan 21, 2013 11:14 am

Re: Shop Talks #23 2-speed Vacuum Controls

tom fleming wrote:I have most of them, missing #23 unfortunately:

[/img]

Damm, that is the story of my life! Thanks anyway
"If this was easy, everyone would be doing it"
User avatar

Golden Jubilee
Golden Jubilee

Posts: 4923

Joined: Thu Nov 29, 2012 11:47 am

Location: Bothell, Washington

Post Mon Jan 21, 2013 11:30 am

Re: Shop Talks #23 2-speed Vacuum Controls

I got a bunch, I'll check
Gentle Men! you can't fight in here! This is the war room!

Return to K and KB

Who is online

Users browsing this forum: No registered users and 8 guests

cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.