Parts Link


The old and reliable.

Rookie
Rookie

Posts: 5

Joined: Sat Feb 23, 2013 1:47 pm

Post Fri Dec 30, 2016 11:27 pm

Re: Parts Link

Hi guys,
I've been restoring your IHC instrument clusters for several years now, and I recently added this electronic tachometer to my list of services. It has the original-style faceplate and chrome outer-bezel as the factory KB's and it is the same outside diameter so it will fit into the original dash hole. The original tachs were a cable-driven mechanical style. This is an electronic unit made for a 12-volt system only. It can be programed for a 4, 6, 8 or 10 cylinder engine using a 12-volt system. It is a 4000 rpm operating unit, so check your engine rpms. Please feel free to call 218-849-2759 or email me (Larry) at lar@arvig.net for more information.
Attachments
DSC04046.JPG
DSC04050.JPG
User avatar

Golden Jubilee
Golden Jubilee

Posts: 678

Joined: Tue Dec 04, 2012 11:44 pm

Post Wed Feb 01, 2017 7:41 am

Re: Parts Link

This information sticker was found on a nos interior door handle.
$_57.jpg

Rusty Driver
Rusty Driver

Posts: 115

Joined: Tue Apr 25, 2017 11:03 am

Post Mon Sep 18, 2017 11:54 am

Re: Parts Link

JimHadfield wrote:Post links to parts vendors using the following format.



*Part Description: Water Pump Rebuild Kit
*Part Number: W6562 (bearing) 41-910-A (Seal) 5043 (gasket)
*Source: Kellogg Automotive
*Source Address: 5562 No. Warren RD, Mariopa Arizona 85139
*Source Web Link: http://www.kelloggautomotive.com
*Phone Number:520-494-7460 Fax 520-494-2011 Toll free 877-499-2011
*Comments:

Water pump rebuild parts for GRD 213 with "cage" type impeller.

Kellogg Auto will also rebuild your pump for you. They were very good to deal with and quite knowledgeable. The cost for the rebuild parts were reasonable IMO. They do have parts for other IHC W/pumps. I spoke to Will. You should have the year, model and engine size before calling.

I have detailed how I rebuilt my water pump and will post that soon.
1947 KB-2
1952 Morris Minor MM (RHD)
1984 Mercedes Benz 380SL
2000 BMW 528i (240,000 Mi.)
1979 Benelli G2 Moped (39 Mi.)

Rusty Driver
Rusty Driver

Posts: 131

Joined: Wed Feb 19, 2014 12:00 am

Location: Quesnel, B.C. Canada

Post Fri Feb 02, 2018 1:57 pm

Re: Parts Link

*Part Description: Gemmer Steering Boxes. Canadian built Trucks only.
Gasket kit 78-3581
Worm Gear bearings 68-3571
sector shaft bushings 78-3576
sector shaft oil seal 48-3591
*Source:Dennis Carpenter Ford

*Comments: Ford built Gemmer steering boxes under license. I found these parts under Ford trucks 1932 - 47 steering box parts. The bushings needed a bit of reaming and the sector shaft gasket bolt holes were a little out but all in all parts were a good fit and made a huge difference.
Attachments
IMG-20171228-00943.jpg

Pile of Parts
Pile of Parts

Posts: 38

Joined: Mon May 14, 2018 11:15 am

Post Wed Sep 19, 2018 8:51 am

GRD-214 expansion plugs

Concave Expansion Plugs

Dorman 550-028

NAPA or almost anywhere

Rookie
Rookie

Posts: 2

Joined: Mon Mar 18, 2019 12:20 pm

Post Mon Mar 18, 2019 5:53 pm

Re: Door hinge

Hi, guys I’m new to this forum. I have a 47 intl. kB 1 1/2 ton truck, I’m just starting to reassemble after I had some work done to chassis. I have misplaced door hinge to truck. Upper rt. Passenger door.
Does anybody have part to sell?

Rusty Driver
Rusty Driver

Posts: 131

Joined: Wed Feb 19, 2014 12:00 am

Location: Quesnel, B.C. Canada

Post Mon Apr 01, 2019 6:31 pm

Re: Parts Link

DNA, Best to post this in the swap meet section, more guys might see it. Go to board index and scroll down to near the bottom.

Golden Jubilee
Golden Jubilee

Posts: 401

Joined: Sun Nov 15, 2015 8:16 am

Post Tue Sep 24, 2019 4:39 pm

KB1 clutch bearing

I replaced the clutch release bearing on a 1949 KB1 ,green diamond engine with a FEDERAL MOGUL 2005 C. ( does not have to be Federal Mogul ) It is the bearing used IH in later years and can be found at multiple parts stores. It is about 1/4” longer but works fine.

Rusty Driver
Rusty Driver

Posts: 115

Joined: Tue Apr 25, 2017 11:03 am

Post Sun Mar 08, 2020 4:10 pm

Re: Parts Link

Part Description: Sunvisor bracket and hinge (?)

1947 KB2
$5 plus shipping from 01970


Image
1947 KB-2
1952 Morris Minor MM (RHD)
1984 Mercedes Benz 380SL
2000 BMW 528i (240,000 Mi.)
1979 Benelli G2 Moped (39 Mi.)

Golden Jubilee
Golden Jubilee

Posts: 5170

Joined: Thu Nov 29, 2012 9:28 pm

Location: Lyman, IA

Post Mon Oct 31, 2022 4:09 pm

Re: Parts Link

K6,K7 possibly K-5 axle grease seal that goes on the outer bearing lock nut:
Fleetrite ZAR25935
National 5957S
IHC 52753-HA
None of these are in production so N.O.S. only
As of todays date (Oct 31, 2022) 4 are available here: Not mine no connection to the seller
https://www.ebay.com/itm/284908647689
Hub to spindle seal, according to SKF seal finder:
CR 34994 and this is a unitized oil seal for use with oil or grease bearing.
PreviousNext

Return to K and KB

Who is online

Users browsing this forum: No registered users and 7 guests

Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.