Parts Link


The old and reliable.

User avatar

Site Admin
Site Admin

Posts: 438

Joined: Sun Nov 25, 2012 1:33 pm

Location: Clearwater, MN

Post Wed Dec 19, 2012 11:39 am

Parts Link

Post links to parts vendors using the following format.

*Part Description:
*Part Number:
*Source:
*Source Address:
*Source Web Link:
*Phone Number:
*Comments:

Rookie
Rookie

Posts: 22

Joined: Wed Jan 23, 2013 10:30 am

Post Thu Feb 07, 2013 9:37 am

Re: Parts Link

6 Volt 40 Amp positive Ground 10 SI Alternator

*Part Description: Alternator to replace generator
*Part Number: #BALT007
*Source: The Billman Company
*Source Address: 2328 Pepper Road, Mount Jackson, VA 22842
*Source Web Link: www.brillman.com
*Phone Number: 888-274-5562; 540-477-4112
*Comments:
Easy installation on a 1949 KB1 with a stock GND 214 engine; this is a one-wire alternator that replaces a stock generator with the 6 volt system.
Also purchased the pulley for 5/8" to 3/4" belt, installed: part #BALTP002
Universal Alternator Mounting Bracket Kit: part #D200
The Brillman Company also supplies cotton braid wire, wire supplies, wire harnesses, battery cables, spark plug wire & wire sets, ignition and electrical components.

Rusty Driver
Rusty Driver

Posts: 175

Joined: Mon Dec 03, 2012 12:36 am

Location: Centerville Id

Post Thu Mar 21, 2013 11:13 pm

Re: Parts Link

I found this tonight from the old site hope it is ok to post

I Was Over on the LRS section and thought NICK had a Great Idea there… So I copied and Pasted it Here..I am starting this topic to be used as a part listing resource for K & KB trucks.

Part Description:

Truck it fits:
Part Manufacturer:
Part Number:
Stores to buy:
Website:

Please use credible places to purchase things. Ebay does not count a reliable and repeatable resource to get parts. Posts in the forum should only address sources for original parts on the truck modifications and non-factory replacement information belongs elsewhere.
Part Description: Brake Wheel Cylinders
Truck it fits: KB-3
Part Manufacturer: Napa
Part Number: 8264 Front L, 8265 Front R , 9344 Rear L, 9345 Rear R ( Not OEM but close and they Work)
Known sites/stores to buy : NAPA
Website: http://www.napaonline.com/Sear…..0312653195
http://www.napaonline.com/Sear…..0307566846
http://www.napaonline.com/Sear…..0074894923
http://www.napaonline.com/Sear…..0272958127
Another source
For KB 1 & 2
http://www.speedwaymotors.com/…..27708.html

Water Cutoff Valve (For Heater goes on top of Head)
Truck it fits: K & KB (GRD 214)
Part Manufacturer: NAPA
Part Number: 660-1418
Known sites/stores to buy: NAPA
Website: http://www.napaonline.com/Sear…..1&N=0

Part Description: Fuel Pump
Truck it fits: K & KB (GRD 214)
Part Manufacturer: NAPA
Part Number: M 836
Known sites/stores to buy: NAPA
WEB SITE: http://www.napaonline.com/Sear…..1'N=0

Part Description: FAN BELT
Truck it fits: K & KB
Part Description: FAN BELT
Part Manufacturer: NAPA
Part Number: 2528412
Known sites/stores to buy: NAPA
Web Site: http://www.napaonline.com/Sear…..0258750293

Part Description: Wiring Harness ( original Cloth Style)
Truck it fits: K & KB
Part Manufacturer: RHODE ISLAND WIRING ( i Used this one)
Vintage Wiring of Maine (heard good things about this one.)
Part Number: CALL AND ORDER WHAT YOU NEED
Known sites/stores to buy: RHODE ISLAND WIRING
Web site: http://riwire.com/
http://www.vintagewiringofmain…..uckcat.htm

Part Description: Gas Cap
Truck it fits: KB
Part Manufacturer: AC DELCO
Part Number: ACD # 12F7 / GM # 19114666
Known sites/stores to buy: NAPA

Part Description: Owners MANUALS/ Parts Catalog/ Service Manuals
Truck it fits: K & KB
Part Manufacturer: BINDER BOOKS
Part Number: Various
Stores to buy: Binder Books
Website: http://www.binderbooks.com/

Part Description: Weatherstrip/ Grommets/ Welts/ Glove boxes
Truck it fits: K & KB
Part Manufacturer: Various
Part Number: Various
Stores to buy: Restoration Speciality
Website: http://www.restorationspecialt…..0ebook.pdf

Part Description: Weatherstirp/ Grommets/ HEADLINER / FLOOR MATS/ ETC
Truck it fits: K & KB
Part Manufacturer: VARIOUS
Part Number: VARIOUS
Stores to buy: CLASS TECH CARS. Get parts from Various suppliers even "Restoration specialties" before Mentioned
Website: http://www.class-tech-cars.com/

Part Description: Engine Rebuild / Gasket Kits
Truck it fits: K & KB
Part Manufacturer: EGGE MACHINE/ Mills Motor Parts
Part Number: VARIOUS FULL KIT : IHGRD214M
Stores to buy: EGGE MACHINE / Mills Motor Parts
Website: http://www.egge.com/kits?make=…..ERNATIONAL
http://www.millsmotorparts.com…..x.php?pg=1

Part: blower motor replacement
Fits: K/KB with barn door heater
Manufacturer: VDO
Part number: PM360
Place to buy: o'reilly auto parts
Comment: not an exact replacement. It is not designed to reverse polarity as the originals were.

Part: wiper blades
Fits: K/KB
Manufacturer: Anco
Part number: 20-09
Place to buy: o'reilly auto parts

Part: wiper blades
Fits: K/KB
Manufacturer: Anco
Part number: 20-09
Place to buy: o'reilly auto parts
yes and they are like 5.99 each and there exactly what the k/kb 1 thru 5 trucks used straight from the factory.

Part Description: Knee Shock Bushing and Pins
Truck it fits: K & KB
Part Manufacturer:
Part Number: ME262KIT
Stores to buy: obsolete Chevy Parts
Website: http://www.parts123.com/PartFr…..et_Part_Co

Part Description: Rear Axle Seal
Truck it fits: KB-2
Part Manufacturer: Napa
Part Number:
Stores to buy: Napa
Website: http://www.napaonline.com/Sear…..1&N=0

Part Description: Rear Axle Locking Washer
Truck it fits: K/KB 1-5
Part Manufacturer: Erik Hutton
Part Number:
Stores to buy: From Erik..
Website: Need to see if contact information can be found

Part Description: Custom Battery Tray Truck it fits: K/KB 1-5
Part Manufacturer: Jacob Chapin
Part Number:
Stores to buy: From Jacob..
Website: Need to see if contact information can be found

Rookie
Rookie

Posts: 5

Joined: Sat Feb 23, 2013 1:47 pm

Post Mon Jan 27, 2014 12:31 pm

Re: Parts Link

Tired of the your dash cluster looking worse than the rest of your truck? Get your gauge cluster looking and working like the day it rolled out of the factory! I will do a complete restoration of your K or KB dash gauges addressing every detail of the entire unit. I have restored many of these International clusters and treat each one as if it were going in my own vehicle. Your instrument faceplates will look like brand-new and your speedometer, odometer and gauges will all operate properly. A complete restoration is $359.00 together with a quick turnaround time. Please feel free to call 218-849-2759 or email me (Larry) at lar@arvig.net for more information.
Attachments
6.JPG
9.JPG
Last edited by tinker925 on Sat Mar 16, 2019 5:53 pm, edited 8 times in total.
User avatar

Golden Jubilee
Golden Jubilee

Posts: 1014

Joined: Fri Nov 30, 2012 3:20 am

Location: Melbourne Australia

Post Wed Apr 30, 2014 5:32 pm

Re: Parts Link

Triple Diamond & IH Mud Flaps

18" wide x 12" high

http://www.ebay.com.au/itm/TRIPLE-DIAMO ... 2ed0cc7476

Triple diamond mud flaps.jpg


Also available in 22" wide x 14" high with the triple diamond logo

http://www.ebay.com.au/itm/TRIPLE-DIAMO ... 2c80683d83

These IH mud flaps are also available

18" wide X 12" high

http://www.ebay.com.au/itm/Mud-Flap-IH- ... 2ed1599945

IH International mud flaps.jpg


Also available in 9" X 10"

http://www.ebay.com.au/itm/IH-Internati ... 2ed0ebfd9c

IH International mud flaps 1.jpg


The IH ones are also available in 13 x 24, 15 x 24, 18 x 24, 24 x 24 & 30 x 24


Trevor
http://www.vihtr.com
Veteran International Harvester Truck Registry
https://www.facebook.com/groups/316122235181405/
International Harvester Trucks Pre 1940

Golden Jubilee
Golden Jubilee

Posts: 435

Joined: Sat Mar 23, 2013 6:36 pm

Location: Pocono Summit , Pa

Post Mon May 05, 2014 7:58 am

Re: Parts Link

Ross Rt12/RT12A steering box rebuild parts
* Parts description: Grease seal
* Part number : 801816
* Parts description: Outer Bushing
* Part number: 647098
* Parts description: Inner Bushing
* Part number: 647099
* Part description: Cover Gasket
* Part number: 807476
* Source : Walck's 4WD
* Source Address: 700 Cedar St, Bowmanstown, Pa.
* Source Web Link: Http://Walcks4wd.com/steering-group.Html
* Phone Number : 610-852-3110
* Comments: A Willys/ Jeep Supply house that carries IH common Ross steering Box parts. Above Numbers are for 15/16"
sector shaft diameter, see vendor for other sizes

Rookie
Rookie

Posts: 9

Joined: Wed Sep 04, 2013 5:03 pm

Post Tue Jun 17, 2014 5:24 pm

Re: Parts Link

Substitute Head Bolts for GD-233 engine
Part Description: Coated Alloy Steel Socket Head Cap Screw, 7/16"-14 Thread, 3" Length, “Ultra Corrosion Resistant Coated Alloy Steel” -Aluminum Color Finish.
*Part Number: 91274A416;
*Source: McMaster-Carr
*Source Address: Internet
*Phone Number: (630) 833-0300
*Source Web Link: http://www.mcmaster.com
*Comments: Description states: Screws will “withstand 1,000 hours of salt spray per ASTM B117.” Class 3 thread fit; "The standard among high-strength fasteners, these screws are stronger than Grade 8 steel screws. They have a minimum tensile strength of 170,000 psi and a minimum Rockwell hardness of C37”.

Substitute Head Bolts for GD-233 engine
Part Description: Black-Oxide Alloy Steel, Socket Head Cap Screw, 7/16"-14 Thread, 3" Length,
Product No: 91251A681;
*Source: McMaster-Carr
*Source Address: Internet
*Phone Number: (630) 833-0300
*Source Web Link: http://www.mcmaster.com
Description states: Screws have been heat-treated for hardness, which results in a dark surface color.
The standard among high-strength fasteners, these screws are stronger than Grade 8 steel screws. They have a minimum tensile strength of 170,000 psi. and a minimum Rockwell hardness of C37.

Substitute Head Bolt Washers for GD-233 engine
Part Description: Black-Oxide Steel Thick Flat Washer, 7/16" Screw Size, 1" OD, .11"-.14" Thick,
Product No: 98029A032;
*Source: McMaster-Carr
*Source Address: Internet
*Phone Number: (630) 833-0300
*Source Web Link: http://www.mcmaster.com
Description: Black-oxide case-hardened steel washers are made from C1008, C1010, or 12L14 steel and have a minimum surface hardness of Rockwell C40.
User avatar

Golden Jubilee
Golden Jubilee

Posts: 654

Joined: Tue Dec 04, 2012 5:38 pm

Post Fri Mar 27, 2015 2:56 pm

Fuel tank sending unit

I thought it was worth posting here about how I was able to repair my sending unit . They are hard to find and this repair is for a common problem that is easy to fix , also will save you some money and work .
Take off the top of the unit and see if the tiny wire inside is still connected , if it is then this won't fix it . If it isn't then re-connect it with some epoxy ,jb quick is what I think I used , make sure that the wire and contact are clean and press the wire down and apply the jb , and hold it there until it sets . There is supposed to be something just like this in the gauge . What happens is the glue after so long gives up . They don't soder it because the wire gets hot and as a result causes the bar that its wrapped around to bend . It's a pretty amazing devise . Here is a picture that should help . The pencil is pointing to the little wire and where it should be connected , this one is .
Attachments
gas gauge.jpg

Rookie
Rookie

Posts: 8

Joined: Thu Dec 27, 2012 12:59 pm

Location: Chatham, ON

Post Mon Jun 15, 2015 9:28 am

Re: Parts Link

*Part Description: Water Pump Rebuild
*Part Number:
*Source: Monarch Rebuilding Inc
*Source Address: 5-75 Bessemer Road, London ON
*Source Web Link: http://www.monarchrebuilding.com
*Phone Number:519-681-5640
*Comments: Great Service, had a water pump for my GRD213 rebuilt. The water pump was rebuilt using the original style washer that rides on the pump housing, the company had purchased a large lot of older (NLA) seals. They will also rebuild packing nut style pumps.

Golden Jubilee
Golden Jubilee

Posts: 302

Joined: Wed Sep 28, 2016 12:15 pm

Post Wed Nov 23, 2016 6:32 pm

Headlight Bucket to Fender Gaskets

I got a pair of nice rubber/neoprene gaskets for a 47-55 Chev truck head light bucket and they are an exact match for my KB3.
Much better than those old crappy cork ones.
Only $10 shipped for the pair on EBay
At least something is easy to get for a KB!

Here is my auction but there are a ton of ones on EBay. So many 7" buckets are the same.

http://www.ebay.com/itm/HEADLIGHT-BUCKET-TO-FENDER-GASKET-CHEVROLET-TRUCKS-1947-48-49-50-51-52-53-54-55-/221870979505?hash=item33a88a79b1:m:mnJgT9JTtBW60xb3Pone9Og&vxp=mtr

Image
.
.
.
Attachments
Headlight Bucket Mounting Gasket.jpg
Next

Return to K and KB

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.