Re: Parts Link Format


The old and reliable.

Golden Jubilee
Golden Jubilee

Posts: 917

Joined: Sat Dec 22, 2012 8:28 am

Post Thu May 01, 2014 7:07 am

Re: Parts Link Format

Tom- Did you also find a cylinder kit for the rear brakes for your KB-5? Also, how abbout the wheel cylinders themselves- do you know of any available?-Stickman 207

Site Admin
Site Admin

Posts: 4822

Joined: Thu Nov 29, 2012 9:10 am

Location: Nampa, Idaho

Post Thu Oct 23, 2014 7:42 pm

Re: Parts Link Format

Possible reproductions for King Seely gauges/senders:

http://mykmlifestyle.com/King_SeeleyTem ... _Send.html

Yard Art
Yard Art

Posts: 67

Joined: Tue Mar 17, 2015 3:55 pm

Location: Portland Oregon

Post Sun Jul 12, 2015 10:10 am

Re: Parts Link Format

Temp sending unit, King Seeley, sold as a tested working unit
http://www.morrisgauge.com/
$100

Also helps with gauge problems.

Site Admin
Site Admin

Posts: 4822

Joined: Thu Nov 29, 2012 9:10 am

Location: Nampa, Idaho

Post Tue Jan 12, 2016 9:34 am

Re: Parts Link Format

New brake hose with special fitting: www.brake-hose.com

Check them out.

Golden Jubilee
Golden Jubilee

Posts: 303

Joined: Sun Nov 15, 2015 8:16 am

Post Thu Mar 17, 2016 12:45 pm

Re: Parts Link Format

1949 KB1-Installed Raybestos breaker drum #2316 on rear. Matched perfectly. I payed around $100 but I saw them on Amazom for under $60.00.

BK

Rookie
Rookie

Posts: 7

Joined: Thu Sep 08, 2016 7:32 am

Post Tue Sep 13, 2016 7:52 am

Re: Parts Link Format

This is an awesome thread. Having the tune up part #'s saved my bacon. NAPA couldn't look the stuff up but it was in stock when I supplied the #'s. Thanks!

Yard Art
Yard Art

Posts: 69

Joined: Sat Oct 03, 2015 4:15 pm

Post Mon Oct 17, 2016 10:04 am

Re: Parts Link Format

Bobby K1 wrote:1949 KB1-Installed Raybestos breaker drum #2316 on rear. Matched perfectly. I payed around $100 but I saw them on Amazom for under $60.00.

BK


Would this be the same for the front drums??

Golden Jubilee
Golden Jubilee

Posts: 302

Joined: Wed Sep 28, 2016 12:15 pm

Post Tue Oct 25, 2016 8:51 am

Re: Parts Link Format

King Pin Kit for my 1949 KB-3 1 Ton Truck. Might fit other K and KB trucks but check size!!
These king pins are .860" in diameter and 5.45" long.
AutoZone has them under part number K141R but here is a part number cross-over list that might be useful too. Once I found this I had a MUCH easier time finding the king pins. I paid about $72 with tax.

Here is the cross-over list;
King Pin Part number Cross Over.JPG


Here is a picture of what comes in the kit. Very useful!
King Pin Kit Picture.JPG

.
.
.

Golden Jubilee
Golden Jubilee

Posts: 303

Joined: Sun Nov 15, 2015 8:16 am

Post Wed Nov 16, 2016 11:21 am

Re: Parts Link Format

Donny wrote:
Bobby K1 wrote:1949 KB1-Installed Raybestos brake drum #2316 on rear. Matched perfectly. I payed around $100 but I saw them on Amazom for under $60.00.

BK


Would this be the same for the front drums??

Sorry for the delay as I did not see your question regarding the front drums. I believe that the lugs are sweged into the front drums. I didn't need fronts and don't know if the front drums are the same minus the lugs. Another more knowing member can probably help you out.
Last edited by Bobby K1 on Mon Sep 16, 2019 2:32 pm, edited 1 time in total.

Golden Jubilee
Golden Jubilee

Posts: 302

Joined: Wed Sep 28, 2016 12:15 pm

Post Thu Jan 26, 2017 9:00 am

Intake/Exhaust Manifold Thick Washers

Round thick, hardened washers used to hold the intake/exhaust manifold to the block. These are NOT the odd shaped ones.
IHC part #127507H or #400877R1. While there are a few places selling them under these numbers they are very expensive at $6+ for each washer plus postage. Some are not exact replacements too.

After much searching I found an exact replacement.
These are .875" OD with a .406" hole diameter and are .188" thick. Sometimes also listed as 7/8" X 13/32" X 3/16".
They are available from MSC under Gibraltar #74213646 for $1.62 each

Image
.
.
.
Attachments
Washer.JPG
PreviousNext

Return to K and KB

Who is online

Users browsing this forum: No registered users and 2 guests

Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.