Page 1 of 1
Cylinder Head Needed
![Post Post](./styles/OldIHC/imageset/icon_post_target.gif)
Posted:
Mon Sep 30, 2013 4:34 pm
by ejwalker
I just pulled the head off my 1948 International KB-5 with the 233 Green Diamond Engine. Something, somewhere along the way knocked a large hole in the head over the number one cylinder. I need a replacement head. The number I found on the head is 142963H and it is located on the drivers side of the head between the number 5 & 6 cylinders. There is a casting number near the front of the head that reads 2 7 P. Above these numbers is a large X.
Butch Walker
Re: Cylinder Head Needed
![Post Post](./styles/OldIHC/imageset/icon_post_target.gif)
Posted:
Mon Sep 30, 2013 6:42 pm
by Scottso
Never post email addresses or ph. numbers in "plain language" unless you want them all over the web.
Re: Cylinder Head Needed
![Post Post](./styles/OldIHC/imageset/icon_post_target.gif)
Posted:
Mon Sep 30, 2013 8:02 pm
by lbesq
EJ, you might try emailing this member (highlight his name) back almost a year ago he had a complete running motor:
viewtopic.php?f=14&t=523Also this member had at least one core 233 motor, Not much time left before he has to "clean" house:
viewtopic.php?f=14&t=831
Re: Cylinder Head Needed
![Post Post](./styles/OldIHC/imageset/icon_post_target.gif)
Posted:
Tue Oct 01, 2013 10:29 am
by tom fleming
EJ, I just talked to Tom Underwood. He has 3 NOS heads for a green diamond engine. Give him a call and let him know I sent you. Do an Internet search for. Parts of the past
Re: Cylinder Head Needed
![Post Post](./styles/OldIHC/imageset/icon_post_target.gif)
Posted:
Fri Oct 11, 2013 2:47 pm
by ejwalker
I contacted Tom Underwood and he had the cylinder head that I needed in stock. He sold it to me and even shipped it before I paid him. As soon as I got his invoice I mailed him a check. It's not often that you run into anyone with that much trust in a complete stranger.
EJ Walker
Re: Cylinder Head Needed
![Post Post](./styles/OldIHC/imageset/icon_post_target.gif)
Posted:
Fri Oct 11, 2013 7:11 pm
by tom fleming
EJ, I told Tom you were a good guy and to work with you. Tom and I go back quite a few years, more on the tractor items, but lately around the KB stuff. He is a good man and a good friend of mine. period.
Re: Cylinder Head Needed
![Post Post](./styles/OldIHC/imageset/icon_post_target.gif)
Posted:
Fri Oct 11, 2013 7:15 pm
by stickman207
I have done business with Tom for quite a few years now. He is reasonable and a gentleman.- Stickman 207
Re: Cylinder Head Needed
![Post Post](./styles/OldIHC/imageset/icon_post_target.gif)
Posted:
Fri Oct 11, 2013 7:56 pm
by lbesq
Could one of you fellows put Tom's info in the Vendors section Please. Thank you.
Lloyd
Re: Cylinder Head Needed
![Post Post](./styles/OldIHC/imageset/icon_post_target.gif)
Posted:
Sun Oct 13, 2013 5:36 am
by tom fleming
Lloyd, your wish is my command! posted.