Tue Jul 23, 2013 8:15 pm by Scottso
FYI (useful or not),
The input shaft IH used is 1 1/4" - 10 tooth spline in light trucks with IH engines,
with the exception of Scout 80's w/152 4 cyl's which are 15/16" - 10
The OD of the pilot bearing is different in K/KB's than later models,ID is the same.
FWIW...
The T-34/36 was only available (as far as I found) with an SV8 in 4x2 LL trucks.Used the same pilot brg (w/o the flywheel bushing) as medium trucks .
Pilot bearings;
K/KB 1-5
46279H IH
302-S National
ID .591
OD 1.654
W .512
R series & up
ST545 / ST527 IH
7109 National
ID .591
OD 1.378
W .354
L series
ST308 IH
202-S National
ID .591
OD 1.378
W .433
LL w/ T-34/36
ST518 IH
88505 National
ID .984
OD 2.047
W .659
Sources,MT-52D,MT-63,MT-97,MT-118
12 yrs.exp. in IH dealer parts dept.
Never argue with a fool...
If you don't have anything nice to say...say nothing.
If you don't learn something new everyday...you weren't paying attention.
THINK! Be sure brain is connected before mouth is in gear.