Hood Latch Adjustment
Posted: Sun Apr 12, 2020 8:43 pmI just finish putting my front end on and I need to make adjustments so the hood will completely lock.
Thanks for the help!
Thanks for the help!
Page 1 of 1
Posted: Sun Apr 12, 2020 8:43 pmRe: Hood Latch Adjustment
Posted: Mon Apr 13, 2020 12:01 pmJust loose or tighten the large triangle headed bolt with the spring, at the nose of the hood. It will extend or tighten the reach of the bolt to connect to the catch plate.
Re: Hood Latch Adjustment
Posted: Mon Apr 13, 2020 1:31 pmyou also may need to move receiver plate a little bit in the grill housing, there is play if you loosen but don't remove screws,
hood can be flexed a little to side to side,
hood can be flexed a little to side to side,
Re: Hood Latch Adjustment
Posted: Mon Apr 13, 2020 8:26 pmI will try to loose the head bolt first! Thank you for the help!
Re: Hood Latch Adjustment
Posted: Thu Apr 16, 2020 8:25 pmWylie wrote:Just loose or tighten the large triangle headed bolt with the spring, at the nose of the hood. It will extend or tighten the reach of the bolt to connect to the catch plate.
That worked I back the spring off a little; now it full latches.
