Re: KB6 Clutch
Posted: Sun Oct 05, 2014 11:34 am
Yep,I see the nose of an H-vac too.
I found the thread I mentioned,on pg.2 I posted a ton of info/links. One has the proper bleeding procedure,follow that and see if you get a pedal. I have a hunch that will do the trick.
Also make sure you have good vacuum to the unit,run the engine a few minutes,shut it off and step on the pedal,you should hear a "whooshing" sound if the unit is getting and holding vacuum. There's should be enough for 2-3 times with the sound fading each time,after there's no vacuum left the pedal should be very hard.
Here's the thread link;
viewtopic.php?f=7&t=3273&hilit=hydrovac%2Chydrovac
I found the thread I mentioned,on pg.2 I posted a ton of info/links. One has the proper bleeding procedure,follow that and see if you get a pedal. I have a hunch that will do the trick.
Also make sure you have good vacuum to the unit,run the engine a few minutes,shut it off and step on the pedal,you should hear a "whooshing" sound if the unit is getting and holding vacuum. There's should be enough for 2-3 times with the sound fading each time,after there's no vacuum left the pedal should be very hard.
Here's the thread link;
viewtopic.php?f=7&t=3273&hilit=hydrovac%2Chydrovac