KB2 Green Diamond Front Engine Mount


The old and reliable.

Yard Art
Yard Art

Posts: 83

Joined: Sat Aug 06, 2016 11:54 am

Location: Sequim, WA

Post Mon Apr 15, 2019 9:16 pm

KB2 Green Diamond Front Engine Mount

I am finally installing my engine and cannot remember if the metal plate go up and the rubber down? It is finally coming back together!!!

Golden Jubilee
Golden Jubilee

Posts: 328

Joined: Fri Mar 18, 2016 9:16 pm

Location: Dallas, TX

Post Tue Apr 16, 2019 9:55 am

Re: KB2 Green Diamond Front Engine Mount

I think it's,... in order from bottom to top. Metal plate, rubber, frame, rubber, engine.

Yard Art
Yard Art

Posts: 83

Joined: Sat Aug 06, 2016 11:54 am

Location: Sequim, WA

Post Sun Apr 21, 2019 1:05 pm

Re: KB2 Green Diamond Front Engine Mount

Does anyone have a picture showing the front motor mounts; it appears someone did not install my properly.

Golden Jubilee
Golden Jubilee

Posts: 328

Joined: Fri Mar 18, 2016 9:16 pm

Location: Dallas, TX

Post Sun Apr 21, 2019 10:39 pm

Re: KB2 Green Diamond Front Engine Mount

DSC_6662-min.JPG
Sorry I was going off memory... Found the pic you need. Engine will touch, top of long rubber piece at top of pic. Metal plate under that rubber touches frame. two square pieces go under frame with a nut.

Yard Art
Yard Art

Posts: 83

Joined: Sat Aug 06, 2016 11:54 am

Location: Sequim, WA

Post Mon Apr 22, 2019 10:58 pm

Re: KB2 Green Diamond Front Engine Mount

I have two long pieces with metal plates and the two small square pieces.

Where does the two long pieces go and which way the metal plates face. I got the small square piece now figure out.

Thank you; this look so easy but I want to make sure I have them right.

Golden Jubilee
Golden Jubilee

Posts: 328

Joined: Fri Mar 18, 2016 9:16 pm

Location: Dallas, TX

Post Tue Apr 23, 2019 10:16 am

Re: KB2 Green Diamond Front Engine Mount

The other long piece is for the radiator mounting. The pic I took, is the complete front mount. And the metal touches the frame on the long piece, and the rubber touches frame for the small squares. Then nut and washer against metal holding square bushing.

Return to K and KB

Who is online

Users browsing this forum: No registered users and 8 guests

Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.