OldIHC

I own a 1966 4WD Travelall with the BG 241 engine. Is there a freeze plug in the block behind the bell house casting? I took the six bolt cover off and tried to peak a look up in there behind the flywheel but can't see much due to the different design of the bell housing. I have replaced the other 7 plugs which were in pretty bad shape. Any help would be appreciated.

Jim Vaaler

Jim, I also posted this in the A,B,C and D forum, I think it will fit in either category.

Lloyd

It should be the same as a BD block, and yes, there is one. The top one is into the water jacket. The lower left one is the plug at the back of the camshaft.