1926 S-26 IHC Custom


The place to put your 1940 and older "Build Off" story.

Golden Jubilee
Golden Jubilee

Posts: 2028

Joined: Fri Apr 08, 2016 4:52 pm

Post Fri Apr 21, 2017 10:46 am

Re: 1926 S-26 IHC Custom

Awesome!

Golden Jubilee
Golden Jubilee

Posts: 313

Joined: Sun Jun 29, 2014 10:57 am

Location: Ottawa Ontario Canada

Post Sat Apr 22, 2017 10:40 am

Re: 1926 S-26 IHC Custom

Thanks guys, I'm, trying to do my best and bring this truck back to show room condition.

I rebuilt the air pump that's driven by the transmission, simple design but lots of parts. I hade to take \my brain down to slow mow when I was reinstalling the piston rings. There's two sets of 3 and there thin, hard to move them around to offset the splits.

Hope I'm not posting too many pictures, I have been taking pictures as I tear down to guide me when I'm reinstalling all the parts.
Attachments
20170422_075449_resized.jpg
20170422_080016_resized.jpg
20170422_102842_resized.jpg
20170422_104619_resized.jpg
20170422_104657_resized.jpg
20170422_110204_resized.jpg
20170422_110211_resized.jpg
20170422_110220_resized.jpg
Last edited by brighad on Sat Apr 22, 2017 3:40 pm, edited 1 time in total.

Site Admin
Site Admin

Posts: 4917

Joined: Thu Nov 29, 2012 9:10 am

Location: Nampa, Idaho

Post Sat Apr 22, 2017 2:02 pm

Re: 1926 S-26 IHC Custom

good pictures, especially on parts and components are great. they help others yet to come.

Golden Jubilee
Golden Jubilee

Posts: 313

Joined: Sun Jun 29, 2014 10:57 am

Location: Ottawa Ontario Canada

Post Sat Apr 22, 2017 6:48 pm

Re: 1926 S-26 IHC Custom

Monsonmotors, the picture below is the make and number on the steering box.
Attachments
20170417_172733_resized.jpg

Golden Jubilee
Golden Jubilee

Posts: 8297

Joined: Thu Dec 27, 2012 12:45 pm

Location: Canada's left Coast

Post Sat Apr 22, 2017 8:44 pm

Re: 1926 S-26 IHC Custom

Do you work at Algonquin College? Nice shop.
I would rather have tools I do not need than to need tools I do not have
“Never argue with stupid people, they will drag you down to their level and then beat you with experience.
Mark Twain

Golden Jubilee
Golden Jubilee

Posts: 2028

Joined: Fri Apr 08, 2016 4:52 pm

Post Sun Apr 23, 2017 5:17 pm

Re: 1926 S-26 IHC Custom

The pto-driven air compressor is very cool. I've never seen one before.
The "CG&P" steering box brand is also unknown to me. An educational day!
Thanks for the pictures.
Honestly, you couldn't post enough pictures.

Golden Jubilee
Golden Jubilee

Posts: 8297

Joined: Thu Dec 27, 2012 12:45 pm

Location: Canada's left Coast

Post Sun Apr 23, 2017 5:35 pm

Re: 1926 S-26 IHC Custom

MM it sounds like you are in LOVE. LOL
I would rather have tools I do not need than to need tools I do not have
“Never argue with stupid people, they will drag you down to their level and then beat you with experience.
Mark Twain

Golden Jubilee
Golden Jubilee

Posts: 313

Joined: Sun Jun 29, 2014 10:57 am

Location: Ottawa Ontario Canada

Post Sun Apr 23, 2017 6:45 pm

Re: 1926 S-26 IHC Custom

I have that air pump on all three of my trucks, its listed as an option when purchased. The pump works on two of my trucks, I haven't tried the third one.

I'm thinking of converting the truck to a 12 volt system or get the front pulley on the motor changed to a double to add a 6 volt alternator.

Any thoughts on this?

Golden Jubilee
Golden Jubilee

Posts: 313

Joined: Sun Jun 29, 2014 10:57 am

Location: Ottawa Ontario Canada

Post Sun Apr 23, 2017 6:59 pm

Re: 1926 S-26 IHC Custom

Found this little switch under the brake pedal on the wreck I tore apart (1920 truck). It cleaned up with vinegar and it was still like new inside when I opened it up. Lubed it up and I think I will use it for the brake switch on my truck.

Cut out new gaskets for the rear end, difficult to find material large enough for the parts. I found a large piece of cork in the old wreck I bought and am able to get quite a few gaskets from it.
Attachments
20170422_174523_resized.jpg
20170422_174546_resized.jpg
20170422_174548_resized.jpg
20170423_074724_resized.jpg
20170423_082320_resized.jpg
20170423_082403_resized.jpg

Golden Jubilee
Golden Jubilee

Posts: 2028

Joined: Fri Apr 08, 2016 4:52 pm

Post Mon Apr 24, 2017 12:13 am

Re: 1926 S-26 IHC Custom

Nikki, yes, I'm in love.

Now I gotta have a pto-driven air compressor!
Where does the air...hose or pipe...terminate?
PreviousNext

Return to 1940 and older Build-Off

Who is online

Users browsing this forum: No registered users and 1 guest

Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.