OldIHC

Anyone out there have a 213 HD engine they would like to get rid of?- Stickman 207

Any luck yet? What happened to the engine that was in your truck?

Despite installing new timing gears and chain, redoing the rod bearings and other smaller tweaks, I still have a loud knocking sound which we now think may be a bad crank. Am getting quite discouraged.- Stickman 207

Sorry to hear of troubles. Hopefully you can find a good shop to confirm problem and possibly repair.

I have a set of .002 undersize new main bearings I would possibly sell. I also have a rebuilt HD213, casting code 1945 , Green Diamond on the side of the block. I did not do the rebuild on this engine. I bought a D2 with it in for a parts truck. To be sure it is good one should take the ouil pan off and check the bearings and journals. It has new pistons and appears to have been board out on the top side. I took the head off just to look in and every thing on top appears new.

I would be interested in the motor if for some reason Stickman decides against it.

John

I just sent WOpp an email regarding the bearings. I am thinking that I have so much into the engine I havenow that I probably will try to do what I need to to make it work so at least at this point I will pass on the engine. I thank WOpp for putting it out there but if you guys can make a deal go for it.- Stickman 207

Hey Stickman, you sent me an email. My emails from this form are not coming through. I must have it entered wrong, I don't know how to correct it. Here is my correct email. opphoney@westriv.com Thanks W Opp

W Opp, I think you might have a block perhaps on the emails, they would be "coming from Jim at OldIhc . I checked your email and it is the same. I will also send you an email right now.

I can not find any kind of block on my email yet none of you guys are coming through. Send me an email outside of oldih and lets see what happens. You should be coming through. TY W Opp. If this won't work call me 701 471 2278 my cell