Page 1 of 1
37 D2 1/2 ton grill needed
Posted:
Sun Apr 27, 2014 10:05 pmby Jims37international
Hi , I have a "37" D2 1/2 ton I am looking for a grill and lower splash guard. If you have them for sale let me know thanks. Jim
Re: 37 D2 1/2 ton grill needed
Posted:
Sun Apr 27, 2014 11:02 pmby Smog_guy
I assume you have one on your truck that's in bad shape?
In my experience it's hard to find one of these grilles in decent shape. I have two or three in rough shape only, sorry.
Re: 37 D2 1/2 ton grill needed
Posted:
Mon Apr 28, 2014 5:13 amby Jims37international
Hi smog thanks for the reply. If yours have a good lower from the 4th trim piece down is all I need . The rest of the grill is in good shape. Let me know what you think . Thanks Jim
Re: 37 D2 1/2 ton grill needed
Posted:
Mon Apr 28, 2014 5:19 amby stickman207
Are the grills and butterfly hoods different sizes for the D-2, D-15 and D-30 models?-Stickman207
Re: 37 D2 1/2 ton grill needed
Posted:
Mon Apr 28, 2014 5:30 amby yankeefan150
Hi Jim,
You may want to check this post, not sure if its still available.
viewtopic.php?f=5&t=3170 --George
Re: 37 D2 1/2 ton grill needed
Posted:
Mon Apr 28, 2014 9:25 amby davemcc
The grills and hoods are identical on D-2 to D-30. Fenders are the same on D-2 an D-15, but different on the D-30.
Dave
Re: 37 D2 1/2 ton grill needed
Posted:
Mon Apr 28, 2014 9:29 amby Smog_guy
Jim, that's usually where they are smashed into.
However, I will look.
REALLY hard to find a good one that isn't on a truck already.
Re: 37 D2 1/2 ton grill needed
Posted:
Mon Apr 28, 2014 5:50 pmby stickman207
Dave- Thanks for the answer to my question.- Stickman207
Re: 37 D2 1/2 ton grill needed
Posted:
Mon Apr 28, 2014 7:53 pmby Jims37international
Thanks for taking a look and helping me finding the grill. I was also looking around the truck today and come to find out I also need the passenger side window regulator and the inner door opener handle. I see I can buy the glass all ready cut. Thanks all of you for your help . Jim