Wed Apr 22, 2015 7:12 am by Flying Bum
I've been looking thru my stuff in order to find what you require...
The only supplier that I can find a part number for is Rare Parts p/n RP30138, sells for about 320 bucks...
I know Moog is also a supplier, but cannot for the life of me find the part number... several weeks ago, someone
(possibly Scott) posted some part numbers, but I cannot find the post...
Note: I hesitate to recommend Rare Parts.... they charge 320 bucks for something that should be less than 100..
At least all the necessary components are included.... but quality is suspect... the grease galleys machined into
the bushes don't line up to the grease fittings, and the overall inside diameter is inconsistent... worst of all, once
they get your cash, you're treated personna-non-grata..... but that's just my opinion.....
As far as installation... not hard.... but recommend that you take the spindles to a machine shop to install/ream the
bushes.... that's unless you're a machinist yourself.... see above comment re: quality..
Prior to this site being hacked, there was a HOW TO write up re: kingpin installation... I believe it originated in "turning wheels",
it detailed pretty much everything regarding the kingpin installation.... I've also looked for it, but unable to find it... maybe
this post will jog another member's memory and they too would have the info you need..
PMH