exhaust manifold wanted


Post up where The Yards are that we can find parts!

Rookie
Rookie

Posts: 6

Joined: Mon Aug 13, 2018 11:16 am

Post Sun Aug 19, 2018 11:19 am

exhaust manifold wanted

Need a passenger side exhaust manifold for a 1975 IH 500 farm truck with the 345. Manifold exits to the rear as opposed down the center.

Golden Jubilee
Golden Jubilee

Posts: 8937

Joined: Thu Dec 27, 2012 12:45 pm

Location: Canada's left Coast

Post Sun Aug 19, 2018 6:10 pm

Re: exhaust manifold wanted

When all alts fails try Googling for tube headers. We had a set as a door prize at the local IHC show and shine. I won the headers and returned them to the draw. I do not have an IHC V8.
Another source may be from a Scout parts dealer. Our local Scout guy id Rod. SCOUT PLUSS in Hope, BC
I would rather have tools I do not need than to need tools I do not have
Thinking risks being controversial and possibly being offensive

Rookie
Rookie

Posts: 6

Joined: Mon Aug 13, 2018 11:16 am

Post Mon Aug 20, 2018 8:17 am

Re: exhaust manifold wanted

Thanks, I have been looking on line but all headers I have found exit out the bottom of the header. Unfortunately they exit right on to my motor mount. It looks like the 500 series was only made a couple years and the rear exit headers are specific to that truck. I may have to have a custom header made but I'd rather keep the truck stock. I bought the truck from the original owner off a farm here in Idaho with 58,000 original miles.
User avatar

Golden Jubilee
Golden Jubilee

Posts: 1887

Joined: Thu Nov 29, 2012 10:40 am

Location: Wichita, Kansas

Post Mon Aug 20, 2018 12:58 pm

Re: exhaust manifold wanted

'74 trucks were introduced with a number of changes- exhaust manifolds, motor mounts, motor position in the engine compartment, coil spring front suspension and wider front track width on lighter models, etc. I believe the rear dump manifolds are common to all '74 and '75 500 series and smaller V8 IH trucks. Center dump manifold are available new from the aftermarket. I don't know if that's true of the rear dump style.

Dean
Last edited by dean466 on Thu Aug 23, 2018 3:01 pm, edited 1 time in total.
Lifelong Kansan
Grew up with red paint
Moved off the farm 33 years ago.

Golden Jubilee
Golden Jubilee

Posts: 1437

Joined: Fri Nov 30, 2012 6:32 am

Location: Minnesota

Post Thu Aug 23, 2018 9:26 am

Re: exhaust manifold wanted

gmsjcs wrote:Need a passenger side exhaust manifold for a 1975 IH 500 farm truck with the 345. Manifold exits to the rear as opposed down the center.


I noticed on your other post, this guy has one.

viewtopic.php?f=12&t=9390

Rookie
Rookie

Posts: 6

Joined: Mon Aug 13, 2018 11:16 am

Post Fri Aug 24, 2018 10:01 am

Re: exhaust manifold wanted

Have not found any aftermarket rear dump. I understand the rear dump were only made a couple years, were made out of some bad cast iron and are prone to crack especially the passenger side.

Rookie
Rookie

Posts: 6

Joined: Mon Aug 13, 2018 11:16 am

Post Fri Aug 24, 2018 10:02 am

Re: exhaust manifold wanted

Thanks Kevin I sent him an email.

Return to IH Junk Yards

Who is online

Users browsing this forum: No registered users and 5 guests

Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.