Page 1 of 1

Minneapolis area

PostPosted: Fri Mar 01, 2013 9:11 pm
by OhioBoy
Saw this on craigslist, hope someone gets some good parts from it- http://minneapolis.craigslist.org/csw/p ... 33199.html



"I have a large supply of used parts for 1955 thru 1980 International Trucks. 4x4 & 4x2 parts in all light truck categories.

Which includes Scout II Dana 44 Front & Rear Axles for Jeep conversions.

Due to excessive requests and limited time to repond, please allow up to 3 days for me to get back to you before sending another email. Thank you

Please provide the following information when replying or calling:

Year: 1973 Make: IH Model: Travelall Series: 1010 4x4/4x2: 4x2 W.B. 131 VIN: 3H0H0CHB83709 Engine: 392 Trans: Auto

Reason I ask for VIN is that many people have the incorrect information on their titles or from what they have been told when they bought it.

Scout:
Scout 80, Scout 800, Scout II, Scout SS II, Terra, Traveler

Pickup, Travelall, Travelette:
900, 1000, 1010, 1100, 1110, 1200, 1210, 1300, 1310, 1500, 1510, 100, 150, 200, 500

Loadstar, Cargostar:
1600, 1700, 1800

Engines-complete or parts:
4-152, 4-196, 6-258, V-266, V-304, V-345 & V-392

Transmissions (mated & divorced, wide & close ratio)-complete or parts:
3 spds, 4 spds (T-18 & T-19), 5 spds & AT Chrysler 727 (No Overdrive T-34's at this time.)

Transfer Cases-complete or parts:
Dana 18, Dana 20, NP 205 & IH Single Speed TC-142 mated & divorced. (Note: No Dana 300 cases pulled out at this time.)

Front Axles-complete or parts:
Dana 27, Dana 30 & Dana 44. Gear sets: 3.07, 3.31, 3.54, 3.73, 4.10, 4.55 & 4.88.

Rear Axles-complete or parts:
Dana 27, Dana 44, Dana 60 & Dana 70. Gear sets: 3.07, 3.31, 3.54, 3.73, 4.10, 4.55 & 4.88.
Lock-outs, drive shafts, carbs, starters, alternators, interior parts, dashes, etc. Sheet metal is limited.


Other stuff:
2" Steering Riser Block for Dana 44 outer knuckle (Came off 1970's Chevy 3/4 ton w/Dana 44 FA)
4" Drop Drag Link arm (Came off 1970's Chevy 3/4 ton w/Dana 44 FA)
One 1970's open knuckle Dana 44 front axle w/Disc brakes from Chevy 1/2 ton truck. Complete lock-out to lock-out with 3.73 gears. $150
One 1970's open knuckle Dana 44 front axle w/Disc brakes from Chevy 3/4 ton truck. Complete lock-out to lock-out with 4.09 gears. Nice rotors, full-time caps. $250
Dana 61 rear axle from '81-'83 Ford w/3.54 gears. I side hub & axle gone. Make offer...
Some Ford Dana 70 Rear axles complete or parts. Make offer. . ..
1975 Ford F350 Dually with Stake bed that has hoist under it. Blown motor. Sell complete or parts.

Prices are reasonable, call or email for specific needs. Thanks.

Thanks. Dan
(C) 612-360-9400

Scout Supply
Howard Lake, MN 55349"

Re: Minneapolis area

PostPosted: Sat Mar 02, 2013 8:55 pm
by Manfred Range
WOW!

Re: Minneapolis area

PostPosted: Sun Mar 03, 2013 7:22 am
by JimHadfield
Going over to Dan's in the summer is soooo much fun.
One day many years ago, we did not get out empty handed. Brought a Scout II for my middle son.
Dan is a great guy and a good place to get parts from.
Manfred Range wrote:WOW!

Re: Minneapolis area

PostPosted: Mon Mar 04, 2013 5:36 pm
by kevin
I will agree with Jim on that, I traded Dan for my T-19 close ratio trans that I put in my S-120-4X4 front Dana 44 front gears 3.55, Also gave him my 77 Scout SSll years before that when I got my S-120 home. He was Happy to get it. Good guy.

Re: Minneapolis area

PostPosted: Mon Mar 25, 2013 3:58 pm
by scutboy
Any older K/KB stuff, or only Scouts?

Re: Minneapolis area

PostPosted: Fri Mar 29, 2013 5:38 pm
by OhioBoy
You'll have to give him a call- I haven't been there in person, so all I know is in the ad above (& pics).

Re: Minneapolis area

PostPosted: Mon Dec 04, 2017 7:53 pm
by jamies 75 392 5s 4x4
Manfred Range wrote:WOW!
Called Don: By the phone number listed above. He is still around. Seems to know more than most :m03104: . If your needing up I think you should give him a call. Thanks Don, for you time. Enjoyed talking. B+ Jamie :h0212: