Torque Wrench Information


Just keep it clean please....

Golden Jubilee
Golden Jubilee

Posts: 338

Joined: Wed May 29, 2013 6:50 am

Post Wed Mar 18, 2020 4:11 pm

Torque Wrench Information

Hi,
Later this summer I am going to need a torque wrench that reads in the 500 ft lb range. In looking over what is available online prices seem to range from about $250 to over $1000. How do I know which ones are good and/or accurate? What is the average accuracy of a good torque wrench? Anyone have any current brand-name recommendations? I'll probably only use it a dozen times at most but I am a stickler for accurately tightening bolts and nuts. In my limited experience, especially when buying a used truck I've found intermittent problems have been traced to loose bolts - such as loose bell housing to engine bolts, loose flywheel bolts and loose u-joint flange bolts. I was reading a post where someone bought the high-dollar Snap-on torque wrench and after about it's 4th use it broke on them before it reached the intended torque.
What about something like this? https://www.ebay.com/itm/Powerbuilt-3-4 ... 2057851167
What do you recommend?
Thank you.
Steve
User avatar

Golden Jubilee
Golden Jubilee

Posts: 739

Joined: Mon Sep 07, 2015 11:14 am

Post Wed Mar 18, 2020 4:30 pm

Re: Torque Wrench Information

https://www.kleintools.com/catalog/torq ... t-25-piece

https://www.pasternack.com/preset-torqu ... gKVCPD_BwE


These are the brands we have in the shop for the crews , all have certifications as required in my trade. Some of these brands do go up to 500ft #
more than I ever needed but are available as well.


This is the one I keep in the old trucks tool box for the lug bolts.
https://www.tekton.com/3-4-inch-drive-c ... ench-24350

Good searching..
Last edited by Harvey on Wed Mar 18, 2020 4:41 pm, edited 2 times in total.

Golden Jubilee
Golden Jubilee

Posts: 1437

Joined: Fri Nov 30, 2012 6:32 am

Location: Minnesota

Post Wed Mar 18, 2020 4:38 pm

Re: Torque Wrench Information

I wonder if the old timers use this in the old days
Attachments
Screenshot_2020-03-18 International Harvester CTS-11 12 R-Series Motor Truck Service Manual - 02 Rear Axle pdf.png

Golden Jubilee
Golden Jubilee

Posts: 8937

Joined: Thu Dec 27, 2012 12:45 pm

Location: Canada's left Coast

Post Wed Mar 18, 2020 6:09 pm

Re: Torque Wrench Information

I have lots of torque wrenches. I bought one of them new. The others came from secondhand stores or pawn shops or swap meets. I have one torque screwdriver. I bought it for setting the fasteners on Autometer Gauges.
Used is OK. I always take a new to me torque wrench to MOTION INDUSTRIES for certification. If you need the certification papers and sticker is costs more money. A simple check-up is about $20.
Attachments
Rich Tension Wrench1.jpg
Rich tension is from Australia. It is NIB and never used.
RICH TENSION WRENCH.jpg
TORQUE WRENCHES.jpg
a few of the collection. 4th from the left came from a Pratt and Whitney engine shop.
I would rather have tools I do not need than to need tools I do not have
Thinking risks being controversial and possibly being offensive
User avatar

Golden Jubilee
Golden Jubilee

Posts: 739

Joined: Mon Sep 07, 2015 11:14 am

Post Wed Mar 18, 2020 9:09 pm

Re: Torque Wrench Information

To keep the tool accurate back off to zero after each use.

Golden Jubilee
Golden Jubilee

Posts: 338

Joined: Wed May 29, 2013 6:50 am

Post Thu Mar 19, 2020 1:02 pm

Re: Torque Wrench Information

Harvey wrote:To keep the tool accurate back off to zero after each use.

Good suggestion.
I never thought about it before, but that makes sense to me.
Thank you.

Golden Jubilee
Golden Jubilee

Posts: 338

Joined: Wed May 29, 2013 6:50 am

Post Thu Mar 19, 2020 1:09 pm

Re: Torque Wrench Information

nikkinutshop wrote:I have lots of torque wrenches. I bought one of them new. The others came from secondhand stores or pawn shops or swap meets. I have one torque screwdriver. I bought it for setting the fasteners on Autometer Gauges.
Used is OK. I always take a new to me torque wrench to MOTION INDUSTRIES for certification. If you need the certification papers and sticker is costs more money. A simple check-up is about $20.

I wonder if that is the same MOTION INDUSTRIES I used to buy seals and O-rings from in Los Angeles? Nice to know there is someplace other than the manufacturer I can send a torque wrench to be checked out.
Thank you.

Golden Jubilee
Golden Jubilee

Posts: 5170

Joined: Thu Nov 29, 2012 9:28 pm

Location: Lyman, IA

Post Thu Mar 19, 2020 1:13 pm

Re: Torque Wrench Information

yep, formally called' "Berry Bearing" they are nationwide.

Return to Non-IH discussion

Who is online

Users browsing this forum: No registered users and 11 guests

cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.