Golden Jubilee
Posts: 2048
Joined: Thu Jan 24, 2013 8:49 pm
Re: 13 speed air valve and D35 hood parts
https://www.google.com/?gws_rd=ssl#q=13 ... on&start=0
CB, I remember the ones with the center screw too. Real easy to put new o-rings in,it could be left on the stick and the job took only a few minutes.
If I remember right I learned 13's on one with the two valves,I know I drove one. Kinda like that set-up,I have long fingers so using the valve on the stick is easy.
I hate to argue BUT I will here...
"Once you cross the 1 1/2 ton line its medium duty."
I TOTALLY disagree and Wiki isn't the only list that says so,GoodYear truck tires for example has the same info.
1.5 ton trucks are LIGHT trucks.
An admin. on another forum has a "rule" back up what you post with facts.
Here's some facts.
D30 spec sheet is here;
http://content.wisconsinhistory.org/cdm ... 5368/rec/6
Shows 9000lbs. which makes it a Class 2
Goodyear agrees;
http://www.goodyeartrucktires.com/pdf/r ... _S15_V.pdf
Want more?
https://www.google.com/?gws_rd=ssl#q=Tr ... sification
Knock yourself out,every link I checked has the same info.
Dems da facts and ya can't buck facts!
As for not getting replies in the correct section, I'm sure you would have,I check it and so do the other 3 guys posting here.
Never argue with a fool...
If you don't have anything nice to say...say nothing.
If you don't learn something new everyday...you weren't paying attention.
THINK! Be sure brain is connected before mouth is in gear.