Page 1 of 1

My 48 KB-2 with Trick Flow heads

PostPosted: Tue Jun 17, 2014 5:21 pm
by Wildmanbill
Here is a video of my 48 KB-2 with an SBC 400 with new Trick Flow Super 23 heads, Edelbrock Airgap intake manifold and new throttle plate in the carb, I accidentally broke an ear off the old one.
http://share.shutterfly.com/share/recei ... jFm1YtmTpg
Bill

Re: My 48 KB-2 with Trick Flow heads

PostPosted: Tue Jun 17, 2014 10:01 pm
by dean466
Smooth running! And a nice exhaust note. We'll need another video later with full throttle acceleration. :D

Dean

Re: My 48 KB-2 with Trick Flow heads

PostPosted: Thu Jun 19, 2014 5:00 am
by manicmechanic
Nice job Bill , all the parts and pieces ,nice to see them come together . Looks like a real rubba-rippa !!

Re: My 48 KB-2 with Trick Flow heads

PostPosted: Thu Jun 19, 2014 4:29 pm
by Wildmanbill
Thanks, now I think when I drive it, it is going to need to have a posi installed, it is going to ring one tire all the time. Luckily, Richmond Gear has a drop in posi unit to take the place of the spider gears without having to swap out the carrier. It's got an AM-20 rear axle with 3.54 gears.
Bill