Page 1 of 1

'52 L110 lug pattern

PostPosted: Mon Mar 18, 2013 11:12 am
by arcticbear
Does anybody know what the lug pattern and lug diameter is for a 1952 L110 pickup?

Re: '52 L110 lug pattern

PostPosted: Mon Mar 18, 2013 12:23 pm
by lbesq
The Bolt circle on those wheels would be 5 on 4 1/2 the stud itself should be a 5/8(I believe) Measure the bolt circle from center of one hole, skip a hole, to outside edge of the next hole.
Here is a good video of how to measure:http://www.youtube.com/watch?v=yV7sDseS3Gg
More simplistic view of measuring :http://www.youtube.com/watch?NR=1&v=7m-Cq9pCeMU&feature=fvwp

Re: '52 L110 lug pattern

PostPosted: Wed Mar 27, 2013 6:41 pm
by Wildmanbill
The studs should be 1/2" diameter.
Bill

Re: '52 L110 lug pattern

PostPosted: Wed Mar 27, 2013 7:48 pm
by lbesq
Wildmanbill wrote:The studs should be 1/2" diameter.
Bill

You are Correct Bill! I measured the holes, sometimes the old melon does not think it through.

Re: '52 L110 lug pattern

PostPosted: Thu Mar 06, 2014 1:43 am
by MattL110
The Ford wheels from the '92 and newer Crown Vic and '90 and newer Town Cars fit. Maybe others too, Ford had a couple different patterns but I know I have 1 wheel off a '90 Town Car on my L110 right now and it fits perfect, even on the center hole it fits snug on the hub just like the IHC wheel does. Not sure if this info is useful to you but figured I would post it up.

Re: '52 L110 lug pattern

PostPosted: Fri Mar 07, 2014 1:35 pm
by diltonw
Hey Matt, for the Ford wheel you have mounted, is it on the front or the back? I was just wondering how the spacing is with the tie rod if in the front.

Re: '52 L110 lug pattern

PostPosted: Wed Mar 12, 2014 11:35 am
by MattL110
diltonw wrote:Hey Matt, for the Ford wheel you have mounted, is it on the front or the back? I was just wondering how the spacing is with the tie rod if in the front.


I have it on the front right wheel currently, it is a 15" doughnut spare wheel and seems to have plenty of clearance on everything. I have an '82 Dodge van and the bolt pattern on those wheels is the same as well but the center hole is too big, although not all wheels do fit snug on center.