Golden Jubilee
Posts: 678
Joined: Tue Dec 04, 2012 11:44 pm
My 48 KB-1 on a 96 Dakota Frame - TAKE TWO
My advice to anyone considering doing their own paint job is to use an inline desiccant air dryer snake http://www.summitracing.com/parts/dvr-130502/overview/ even if you have a water separator on your compressor. Also, a new hose and drain the tank prior to painting. I now keep the inline snake on my air line at all times, even if I am just blowing off parts from sanding.
The air must have had moisture and or oil in it and it contaminated the surface as I painted. Doing it once was not easy but doing it twice is even harder. You live and you learn and this is how you learn sometimes.